Dulux Trade Quick Dry Satinwood - White - 2.5L

No, the Dulux Trade Quick Dry Satinwood is specifically formulated for interior use only on wood and metal surfaces.

The paint is touch dry in 1-2 hours and can be recoated in 4-6 hours, depending on environmental conditions like temperature and humidity.

Yes, but for best results, bare wood should be properly prepared, primed, and then coated with Dulux Trade Quick Dry Undercoat before applying the Satinwood.

After removing as much excess paint as possible, clean brushes and other tools thoroughly with water.

One litre of Dulux Trade Quick Dry Satinwood covers at least 12 square metres, depending on the surface porosity and application method.

For optimal application, use a good quality synthetic brush made from nylon or polyester, designed for water-based paints.

Thinning is not usually necessary. If required, add up to 1 part clean water to 20 parts paint. Always stir thoroughly before use.

Ensure the surface was properly cleaned, dry, and free from dust or grease before application. For non-porous surfaces or significant color changes, an appropriate primer or undercoat may be necessary.

Use a high-quality synthetic brush designed for water-based paints. Apply with smooth, even strokes and avoid overworking the paint. Ensure the paint is not too thick; a slight dilution may help if absolutely necessary, following manufacturer guidelines.

Drying times are affected by temperature and humidity. Ensure the room is well-ventilated and within the recommended temperature range. Avoid application in very damp conditions.

Ensure the surface is smooth and properly prepared. Apply paint evenly, maintaining a wet edge to avoid lap marks. Apply a second coat if necessary after the first has dried sufficiently.