Little Dutch Forest Wonders Wallpaper - Multicolor

Use a high-quality adhesive specifically formulated for non-woven (paste-the-wall) wallpaper.

Measure the height of your wall and its total width. Divide the total width by the width of one roll (52cm) to determine the number of strips needed. Divide this by the number of strips per roll (which can be calculated by dividing the roll length (10m) by the wall height) to get the number of rolls. Always round up to ensure you have enough.

This wallpaper is best suited for dry interior walls. It is not recommended for areas with high humidity or direct water exposure, such as a shower enclosure.

The wall must be clean, dry, smooth, and free from dust, grease, or old wallpaper residue. It's recommended to prime the wall with a suitable wallpaper primer for best adhesion and future removal.

While efforts are made to represent colors accurately, slight variations may occur due to monitor settings and lighting conditions. It's advisable to order a sample if exact color matching is critical.

The wallpaper is designed to be dry-stripped. Simply peel it off the wall starting from a corner. No steaming or scraping is typically required.

Ensure the wall is clean, dry, and has been properly primed. Check that the correct type of non-woven wallpaper glue has been used and applied evenly.

Smooth out bubbles immediately after hanging using a wallpaper brush or smoothing tool, working from the center outwards. Ensure glue is applied to the entire surface of the wall.

Ensure you are pulling slowly and steadily. If resistance is met, you may need to slightly dampen the edges with a sponge and water (avoid soaking) and try again.

Make sure the edges of the wallpaper strips are butted tightly together without overlapping. Ensure consistent glue application along the edges.