Dynamode High Speed HDMI Lead with Ethernet, Male to Male, Gold Plated Connectors - 10m Black

This cable supports the HDMI 1.4 specification, which is ideal for Full HD (1080p) resolutions. It can also support 4K resolutions, but typically at lower refresh rates (up to 30Hz).

The HDMI 1.4 standard does not officially support High Dynamic Range (HDR) or the higher bandwidth required for 4K content at 60Hz or higher. For HDR and higher refresh rate 4K content, an HDMI 2.0 or newer cable is recommended.

ARC allows your TV to send audio back to your soundbar or AV receiver using the same HDMI cable that sends video to the TV. This reduces the number of cables needed for your audio setup.

The cable length is 10 meters.

Yes, the connectors are gold-plated to ensure durability and reliable signal transmission.

Yes, the cable is magnetically shielded to reduce EMI and RF noise across all frequencies, helping to maintain a clean signal.

You can connect devices like Blu-ray players, media centers, HDTVs, game consoles, and computers to displays or receivers that have standard HDMI Type A ports.

Ensure both ends of the cable are securely connected. Try a different HDMI port on your display device. Verify the correct input source is selected. Test with another HDMI cable to rule out device issues.

Check for any physical damage to the cable or connectors. Ensure the cable is not bent sharply or stressed. Reduce cable length if possible, or consider a higher-spec cable if experiencing issues over the full 10 meters.

Confirm that both your TV and audio device (soundbar/receiver) support ARC and have it enabled in their respective settings. Ensure you are using the correct HDMI port labeled 'ARC' on both devices. Try restarting both devices.

The HDMI 1.4 standard has bandwidth limitations. For resolutions above 1080p at higher refresh rates, or for 4K content beyond 30Hz, this cable may not be suitable. Consider an HDMI 2.0 or higher cable for such applications.