Whyte Rheo 3 Step Through Electric Hybrid Bike - Green

The range depends on factors like rider weight, terrain, assist level, and pedaling effort. For typical commuting conditions with moderate assistance, expect a practical range suitable for daily rides.

The RHeO 3 ST is primarily designed for commuting and paved or light gravel surfaces. While the wide tires offer some comfort on rougher paths, it is not intended for aggressive off-road riding.

The battery is integrated into the frame. You will connect the provided charger directly to the bike's charging port, typically located on the frame, and then plug the charger into a standard electrical outlet.

While the bike will arrive mostly assembled, it is highly recommended to have it professionally assembled and inspected by a qualified bicycle mechanic to ensure all components are correctly installed and adjusted for safe riding.

Keep the battery charged and avoid extreme temperatures. The motor and sensor should be kept clean. Refer to the specific e-bike system manual for detailed care instructions, but generally, routine cleaning and professional checks are advised.

Refer to the product manual or manufacturer's specifications for the exact weight limit for the rider and cargo. However, the integrated rack is designed for typical commuting loads.

Ensure the battery is charged and properly connected. Check that the bike is in an appropriate assist mode and that the speed sensor is correctly aligned and unobstructed.

Check the gear cable tension and indexing. For e-bike specific gearing, consult a qualified mechanic if adjustments are difficult.

Inspect brake pads for wear and clean the brake rotors. Ensure brake cables are not stretched or damaged. For hydraulic brakes, bleeding may be required.

Verify the charger is correctly plugged into both the wall and the bike. Check the charging port for debris. Try a different power outlet. If the issue persists, contact support.

Clean the seatpost and stanchion. Ensure there is no excessive dirt or grit. Lightly lubricate the stanchion if necessary, following the manufacturer's recommendations.