Superfresco Easy Organics Wallpaper - Green - Floral

Yes, 'Superfresco Easy' specifically indicates that this wallpaper is designed for 'paste the wall' application. This means you apply the adhesive directly to your wall, not to the back of the wallpaper, making the process cleaner and quicker.

You should use a good quality wallpaper adhesive specifically formulated for 'paste the wall' wallpapers. Most general-purpose wallpaper pastes are suitable, but always check the paste manufacturer's instructions for compatibility.

While this wallpaper is durable, it's not specifically designed for high-humidity environments like bathrooms or kitchens where steam and moisture are prevalent. For these areas, we recommend wallpapers specifically labeled as 'washable' or 'suitable for kitchens/bathrooms' to prevent damage over time.

This wallpaper can be gently wiped clean. Use a soft, damp cloth or sponge with plain water to remove dust or light marks. Avoid using abrasive cleaners, harsh chemicals, or excessive scrubbing, especially on the metallic embellished areas, as this could damage the finish.

Info needed: Please refer to the specific product packaging or technical specifications for the exact pattern repeat measurement. This information is crucial for accurately cutting strips and ensuring proper pattern alignment.

Superfresco Easy wallpapers are generally designed to be easier to remove than traditional wallpapers. They often peel off dry in full strips, provided the wall was properly prepared before application. Always refer to the product packaging for specific removal instructions.

The 'Organic Plain Co-ordinates' are complementary plain wallpapers from the same 'Organics' collection. They are designed to perfectly match the colors and tones of the Metallic Floral wallpaper, allowing you to create a cohesive look by using the patterned paper on a feature wall and the plain coordinates on the other walls.

Small bubbles often disappear as the paste dries. For larger, persistent bubbles, you can carefully pierce them with a fine needle and gently smooth out the air with a wallpaper smoother or clean cloth. If the bubble is near an edge, gently lift the edge, apply more paste, and re-smooth.

Ensure you've applied enough paste to the edges of the wallpaper. If seams lift after drying, use a seam roller or a small brush to apply a little extra paste directly under the seam and press firmly. For visible seams, ensure strips are hung perfectly edge-to-edge without overlapping.

Pattern matching is crucial. Before cutting, lay out strips side-by-side to ensure the pattern aligns. If a pattern mismatch occurs during hanging, gently peel back the strip (since it's 'paste the wall', it's more forgiving), realign, and re-smooth. Working slowly and checking alignment for each strip is key.

Ensure the wall surface is properly prepared (clean, dry, non-porous, and free of dust). Use a high-quality 'paste the wall' specific wallpaper adhesive and apply it evenly to the wall. If a section is not sticking, reapply paste to that area of the wall and firmly press the wallpaper back into place.

Immediately wipe off any excess paste that gets onto the wallpaper surface using a clean, damp sponge or cloth. Do this before the paste dries to prevent staining or leaving a sheen. Avoid rubbing too vigorously, especially on the metallic areas.