Teamson Home Two-Tier Birdbath Outdoor Garden Fountain - Grey

Water levels should be checked every 1-2 days and refilled as needed to keep the pump submerged. This frequency can vary depending on evaporation rates and wind conditions.

Distilled or filtered water is recommended to minimize mineral buildup and algae growth. Tap water can be used, but will require more frequent cleaning.

This fountain is designed specifically for outdoor use and requires an outdoor power source. Using it indoors may not be suitable due to potential water splashing and electrical requirements.

Drain the fountain and use a soft cloth with mild soap and water to clean surfaces. Rinse thoroughly. For tougher buildup, a gentle brush can be used on non-delicate parts. Avoid abrasive cleaners.

Assembly typically involves connecting the main components and the pump. Following the instruction manual step-by-step should make the process manageable for most users.

The fountain has a Height of 99 cm, Width of 53 cm, and Depth of 53 cm.

Yes, it is recommended to connect the fountain to a GFCI (Ground Fault Circuit Interrupter) protected outdoor electrical outlet for safety.

Ensure the pump is fully submerged in water. Check that the power cord is securely plugged into a working outlet. Clean the pump intake for any blockages.

Check the pump intake for debris or algae. Ensure the water level is adequate. Verify that the tubing is not kinked or blocked. Clean the pump if necessary.

Verify the LED light connection according to the manual. Ensure the power source is functional and the pump is receiving power. Check if the LED component itself needs replacement.

Adjust the position of the water outlet or the water flow rate if possible. Ensure the fountain is on a level surface. Add small, smooth stones to the basin to help break the water's fall.

Check that the pump is fully submerged. Ensure all components are securely assembled and not vibrating against each other. Verify the fountain is on a stable, level surface.