Developed using decades of experience and expert knowledge, Littlefair's brings you a unique Water...Developed using decades of experience and expert knowledge, Littlefair's brings you a unique Water Based Interior Floor Stain. Suitable for use on new or re-sanded floorboards, this dye creates a light wash or builds up to a strong 'chalky' white finish. It is quick drying, easy to clean with a brush, and lightfast with a low odour. Manufacturer: Littlefair's Wood Finishing Products
This guide is for anyone looking to revitalize their interior wooden floors with a beautiful, chalky white finish using Littlefair's Seawashed White Wood Floor Stain. The product offers quick-drying, low-odor application and is suitable for new or re-sanded floorboards. Note that achieving the desired finish may require multiple coats, depending on the wood type and existing finish.
All features
Colour
White
Brand
Littlefair's
Extended Product Information
FAQs
How many coats of stain are needed?
The number of coats depends on the desired color intensity and the type of wood. Generally, two to three coats are recommended.
Can this stain be used on exterior surfaces?
No, this is an interior wood floor stain and is not suitable for exterior use.
What kind of brush should I use?
Use a brush suitable for water-based products, such as a synthetic bristle brush.
How long does it take for the stain to dry?
Drying time varies, but it typically dries to the touch in a few hours. Allow ample time between coats.
How do I clean up spills?
Wipe up spills immediately with a damp cloth.
Can I apply a sealant over the stain?
Yes, once the stain is completely dry, you can apply a clear sealant to protect the finish.
Is the stain safe for pets and children?
Once fully dried, the stain is safe. Ensure adequate ventilation during application.
Troubleshooting
Uneven finish or streaks
Ensure even application, avoid overloading the brush, and sand lightly between coats.
Color too light
Apply additional coats, allowing each coat to dry completely.
Slow drying time
Ensure proper ventilation and temperature in the room. High humidity can also affect drying times.
Pros and Cons
Pros
Quick drying time
Low odor
Easy to clean
Creates a range of white finishes
Cons
May require multiple coats for desired effect
Color may vary depending on wood type and preparation
Setup, Compatibility & Care
Surface Preparation: Ensure the floorboards are clean, dry, and free from old finishes. Sand the floor to create a smooth surface, and remove all dust.
Application: Apply the stain evenly using a brush or applicator, following the grain of the wood. For a deeper color, apply multiple coats, allowing each coat to dry completely.
Drying Time: Allow the stain to dry completely between coats. Drying times can vary depending on environmental conditions.
Cleaning: Clean brushes and applicators with water immediately after use.
Compatibility: This product is specifically formulated for use on interior wooden floors. Ensure the wood is compatible.
Care: Regular sweeping and occasional damp mopping with a mild detergent will keep the floors looking their best. Avoid harsh chemicals and abrasive cleaners.