Wednesbury Copper Pipe - 22mm x 2m

With proper installation and care, copper pipes can last for several decades.

You will need a pipe cutter, deburring tool, soldering torch (if soldering), flux, solder, and appropriate fittings.

This pipe is designed for fuels. Consult local regulations and a qualified plumber to ensure it is suitable and installed correctly for gas applications.

Ensure proper water chemistry, use appropriate fittings, and avoid contact with dissimilar metals that could cause galvanic corrosion.

It means the pipe has a diameter of 22 millimeters and a length of 2 meters.

This pipe can be used for plumbing and heating systems in both domestic and commercial applications.

Yes, you can paint copper pipes to protect them or match your decor. Ensure the surface is clean and primed before painting.

Store the copper pipes in a dry place to prevent corrosion and protect them from physical damage.

Check the joints for proper soldering or compression fitting tightness. Re-solder or tighten as needed. Ensure that the pipe ends are properly deburred before joining.

Assess the water chemistry for acidity or other corrosive elements. Consider using corrosion inhibitors or replacing sections of pipe if corrosion is severe.

Use a pipe bender to avoid kinking. Fill the pipe with sand before bending for sharper bends, and ensure the correct bending radius is followed.