Wavin OsmaSoil - 110mm - 3M - Black

The Wavin OsmaSoil pipe is primarily used for soil, waste, and ventilation in domestic and commercial drainage systems, efficiently removing sanitary waste.

This certification indicates that the product has been tested and conforms to the rigorous British and European standards for push-fit and mechanical joints for drains and pipes. It ensures quality, safety, and performance.

While PVC-U can handle moderate temperatures, this system is primarily designed for soil and waste. For continuous high-temperature discharges, specialized systems might be more appropriate. Check product specifications for temperature limits.

The soil pipe features Recycore® Technology and contains at least 50% recycled content, while maintaining the performance of virgin products.

The Wavin OsmaSoil system offers both push-fit joints for quick assembly and solvent weld joints for a permanent, sealed connection.

The Wavin OsmaSoil range is available in a variety of colours. This specific product is black.

The PVC-U pipe is low maintenance. Clean the exterior with a damp cloth. Avoid abrasive cleaners or solvents.

Ensure the pipe is fully inserted into the fitting socket and that the rubber seal is correctly seated and free from debris. Check the pipe end for damage. Re-lubricate and re-insert if necessary.

The joint may not have been prepared or executed correctly. The surfaces may have been too dry or too wet, or it was not held long enough. The joint will need to be cut out and remade, ensuring proper application of primer and cement.

Ensure you are using a sharp, fine-toothed saw or a dedicated pipe cutter. Support the pipe firmly during cutting to prevent vibration and ensure a square cut.

Verify that both the pipe and the fitting are from the Wavin OsmaSoil 110mm range. Ensure there is no obstruction or damage to the pipe end or the fitting socket.