Xl Joinery Internal Salerno Oak Door - 1981 X 610 X 35mm (24")

No, the XL Joinery Salerno Oak Door is supplied unfinished and requires painting or staining to complete.

This specific model measures 1981mm in height, 610mm in width, and 35mm in thickness (often referred to as 24 inches).

No, this is an internal door and is not designed for exterior use or to withstand weather conditions.

Yes, XL Joinery offers matching glazed and fire doors in the Salerno range to create a consistent look throughout your home.

It is generally recommended not to remove more than 5mm from any single edge of the door to maintain its structural integrity.

You can use any standard interior wood paint or stain. Always follow the product manufacturer's instructions for application and drying times.

This specific listing is for a standard internal door. Matching fire-rated doors are available in the Salerno range if required.

Check if the door has warped due to humidity changes. Minor sticking can often be resolved by carefully sanding the edge where it rubs. Ensure hinges are properly aligned and tightened.

Ensure the door was properly prepared (sanded and cleaned) before finishing. Apply additional thin coats of paint or stain, allowing proper drying time between applications.

Verify the frame is square and plumb. Adjust hinges if possible or consider if the door was trimmed excessively during installation. Ensure the door is the correct size for the frame.