Bristan Acorn Easyfit Mono Sink Mixer - Gun Metal

It means the tap is designed to be installed from above the sink, simplifying the process significantly compared to traditional methods that require access from underneath.

The tap comes with an Allen key and a specific Easyfit tool for installation. Basic plumbing tools may be needed for connecting to the water supply.

A minimum of 0.5 bar water pressure is recommended for optimal performance of the tap.

Use a soft, damp cloth and mild soap if necessary. Avoid abrasive cleaners. Wipe dry after cleaning to prevent water spots.

Yes, it is designed to be connected to both hot and cold water supplies, provided your system meets the minimum pressure requirements.

Refer to the product packaging or Bristan's official website for the specific warranty details, as these can vary.

Yes, the tap is designed to work with systems operating at or above 0.5 bar, which typically covers most modern domestic water systems including high-pressure ones.

Ensure the main water supply is on. Check that the isolation valves are fully open. Verify that the flexi-tails are not kinked and that the water pressure meets the minimum requirement (0.5 bar).

Check that the Easyfit securing screws are tightened correctly. Ensure the rubber seals on the base are correctly seated.

The ceramic disc valves may require cleaning if sediment has accumulated. Refer to the manufacturer's instructions for internal maintenance or contact customer support.

This can indicate a problem with the ceramic disc valves. Contact customer support for advice or potential replacement parts.