JCP CONSTRUCTION PRODUCTS Shield Anchors Hook Bolt Zyp - M10 X 115 - Box Of 10 - Silver

This shield anchor hook bolt is specifically designed for use in solid concrete and dense masonry applications.

The dimensions are M10 for the thread size and 115mm for the length.

Each box contains 10 shield anchors hook bolts.

It is best suited for solid concrete and dense masonry. Its performance in softer or hollow brick types may be significantly reduced and is not recommended for heavy-duty applications in such materials.

Shield anchors expand as they are tightened, creating a strong mechanical interlock with the base material, providing a secure and reliable fixing, especially under load.

Yes, you will need a drill with the appropriate masonry bit to create the hole, and a wrench or socket set to tighten the hook bolt.

The product description does not specify outdoor-specific coatings. While it can function outdoors, prolonged exposure to harsh weather might lead to corrosion over time depending on the environmental conditions.

Ensure the drilled hole is the correct diameter and depth. Verify the base material is solid concrete or dense masonry. Clean the hole thoroughly before insertion.

Check if the drilled hole diameter matches the anchor specifications. Ensure the hole is clean and free of obstructions. Slightly ream the hole if necessary, but avoid making it too large.

For environments prone to moisture, consider using galvanized or stainless steel anchors if available for your application. Ensure proper installation to prevent water ingress around the anchor.