Best current price£74.97from B&Q
Shopping.co.uk recommended and popular offers
B&Q£74.97Visit shop B&Q - Internal Oak Palermo Fd30 Fire Door2032 X 813 X 44mmXl Joinery
Visit shop26 offers from £74.97 - £179.97
View price history by clicking the chart icon.
This guide is for homeowners and builders seeking a reliable and aesthetically pleasing fire door. The XL Joinery Palermo Essential Fire Door offers crucial FD30 fire protection and enhanced sound and heat insulation due to its solid core construction. A key consideration is that it is supplied unfinished, requiring a custom finish to be applied.
| Colour | White |
|---|---|
| Model Part Number | EOPAL32-FD |
| Brand | XL Joinery |
FD30 certification means the door is designed and tested to provide a fire resistance of at least 30 minutes.
No, for fire safety compliance, this door must be installed with fire-rated linings and hardware, including appropriate hinges.
The door is manufactured using American white oak.
No, the door is supplied unfinished and requires you to apply your own paint or stain.
Clean with a slightly damp cloth. Avoid harsh chemicals or excessive moisture. Refer to the care instructions for your chosen finish.
The model EOPAL32-FD is 1981mm high x 838mm wide x 44mm deep. Other sizes are available in the Palermo range.
Yes, the engineered solid core construction offers better heat retention compared to hollow-core doors.
Check for any obstructions, ensure hinges are correctly aligned and tightened, and verify the frame is square. The door may require adjustment or planing if it has swelled.
Ensure the surface was properly prepared before finishing. Apply additional thin coats of paint or stain, allowing adequate drying time between applications. Sand lightly between coats if necessary.
Verify that the door is a solid core model and that all edges are properly sealed against the frame. Gaps can significantly reduce acoustic performance.
Setup:
This door is supplied unfinished and requires proper preparation before finishing. Ensure the door is clean and dry. Apply your chosen finish (paint or stain) evenly, paying close attention to the manufacturer's instructions for the finishing product. Install the door using the appropriate fire-rated hardware and ensure it is hung correctly in a frame compatible with fire door requirements. It is crucial to install with certified fire-rated linings and hardware to achieve the stated FD30 protection.
Compatibility:
This door is designed to be compatible with standard ironmongery and fire-rated accessories. It is part of a range that includes 10 different fire door sizes. Always ensure the frame and any associated hardware are rated for fire door use.
Care:
To maintain the appearance and integrity of the door, clean it with a slightly damp cloth. Avoid abrasive cleaners or excessive moisture. If the door has been finished with paint or stain, follow the care instructions for that specific finish.
