Blackfriar Enamel Paint - Gloss Black 125ml

This enamel paint is ideal for use on garden tools, bicycles, toys, wood, metal, and most normal surfaces. Always ensure the surface is clean and prepared correctly.

Yes, it is suitable for both interior and exterior use, providing a tough, long-lasting finish.

The paint is quick-drying. Drying times can vary depending on temperature and humidity, but a second coat can typically be applied after a few hours.

Clean brushes and equipment immediately after use with white spirit.

Ensure the paint is well-stirred and applied in thin, even coats using a good quality brush or roller. Proper surface preparation is also key.

For most standard surfaces like prepared wood and previously painted metal, a primer may not be necessary. However, for very smooth, non-porous surfaces, or bare metal prone to rust, a suitable primer is recommended for best adhesion and protection.

Ensure the paint was applied in a well-ventilated area and at an appropriate temperature (not too cold or damp). Thick coats can also delay drying; apply thinner coats if necessary.

Stir the paint thoroughly before and during application. Use a good quality brush or roller and apply in even strokes, avoiding over-brushing. Ensure the surface is properly prepared.

The surface may not have been adequately prepared (clean, dry, free from grease/dust). Consider using a primer, especially on metal or very smooth surfaces, and ensure the first coat was fully dry before applying subsequent coats.