Best current price£10.99from eBay
Shopping.co.uk recommended and popular offers
eBay£10.99Visit shop Johnstones Shed & Fence Treatment Paint 5L GREY protect garden wood
Visit shop
B&Q£11.88Visit shop B&Q - Woodworks Grey Shed & Fence Treatment5L
Visit shop4 offers from £10.99 - £26.93
View price history by clicking the chart icon.
This guide is for homeowners and professional tradespeople looking to protect and enhance their outdoor wood structures. The key benefit is long-lasting protection against weathering, fading, and biological growth. A potential caveat is that specific application conditions may influence drying time. Johnstone's Trade Woodworks Shed & Fence Treatment in Grey offers a durable, versatile solution for sheds, fences, garden furniture, and decking, preventing damage from environmental factors and biological organisms.
| Colour | Grey |
|---|---|
| Brand | Johnstone's |
It is generally recommended to apply two or more coats, depending on the condition and porosity of the wood. Always allow adequate drying time between coats.
Yes, it can be used on exterior wood surfaces including decking, provided the decking is not in direct contact with the ground and has been properly prepared.
The drying time varies depending on conditions, but it is formulated to dry quickly. Typically, it is touch-dry within a few hours. Always check the product's specific instructions for precise drying times.
The long-lasting protection typically endures for several years. Reapplication every 2-3 years, or as needed based on wear and environmental exposure, is recommended to maintain optimal protection.
Yes, this wood treatment is versatile and suitable for use on garden furniture, providing protection and enhancing its appearance.
Surfaces must be clean, dry, and free from dirt, grease, and loose material. Remove any flaking paint or old treatments. Light sanding is recommended for best adhesion.
Yes, this treatment can be applied using a brush or a sprayer for efficient and even coverage.
Ensure the product was stirred thoroughly before and during application. Apply in consistent, overlapping strokes. Avoid applying in direct sunlight or windy conditions which can cause premature drying.
Ensure the surface was thoroughly cleaned of existing mold and mildew before application. For persistent issues, consider a dedicated mold remover treatment prior to applying the Woodworks Shed & Fence Treatment.
Check the storage conditions; extreme cold can thicken the product. Ensure you are stirring vigorously. In very specific circumstances, and if recommended by the manufacturer for the application method, a small amount of water might be added, but always refer to the product's specific guidelines first.
This can occur if applied too thickly or in humid conditions. Allow for additional drying time in a well-ventilated area. If still sticky after several days, a light sanding might be required followed by a thin re-coat.
Preparation: Ensure all wood surfaces are clean, dry, and free from dust, dirt, and grease. Remove any existing flaking paint or old treatment. For best results, lightly sand the surface. If the wood is already treated or painted, ensure compatibility or remove the previous finish.
Application: Apply using a good quality brush or sprayer. Work the treatment into the grain of the wood. Apply two or more coats, depending on the porosity of the wood and desired finish. Allow adequate drying time between coats as per product instructions, typically a few hours.
Compatibility: This treatment is designed for bare or previously treated softwood and hardwood exterior timber. It is not recommended for use on interior wood, decking that is in direct contact with the ground, or on wood that has been previously varnished or lacquered.
Care: Clean application tools immediately after use with water. Store the product in a cool, dry place, away from direct sunlight and frost. Reapply the treatment every 2-3 years, or as needed, to maintain protection.
