Best current price£4.45from B&Q
Shopping.co.uk recommended and popular offers
B&Q£4.45Visit shop B&Q - M6 (6mm X 50mm)Pack Of 4Pn 82952Solid Zinc Plated Steel Button Round Head RivetsD02B
Visit shop2 offers from £4.45 - £4.86
View price history by clicking the chart icon.
Screws City Button Round Head Rivets (DIN660) are designed for professionals and DIY enthusiasts requiring a permanent, high-strength fastening solution for metalwork, construction, and mechanical assemblies. Featuring a durable 4mm diameter and 30mm length, these grey zinc-plated rivets provide superior corrosion resistance and a clean, flush appearance once installed. While these fasteners offer exceptional structural integrity, please note that they require specific riveting tools for proper deformation and are intended for permanent applications that do not require disassembly.
| Colour | Grey |
|---|---|
| Model Part Number | DIN660 |
| Brand | Screws City |
No, these are solid rivets and require a hammer and bucking bar or a specialized solid riveting tool to deform the shank.
The zinc plating offers good corrosion resistance for moderate environments, but for harsh salt-spray or marine conditions, additional weather-resistant coatings are recommended.
These rivets have a 4mm diameter.
No, solid rivets are intended for permanent, single-use installation and must be drilled out if they need to be removed.
They are high-quality metal rivets with a zinc-plated finish for enhanced durability and corrosion protection.
Ensure the pilot hole is clean and free of burrs, and verify that the riveting tool is aligned perfectly perpendicular to the surface.
The rivet may have been under-driven. Ensure you are using the correct force to fully deform the shank end, or check that the hole diameter is not too large for the 4mm shank.
Installation requires a manual or pneumatic riveting hammer or a bucking bar setup, as these are solid-shank rivets. Ensure that you have access to both sides of the material being joined, as the shank must be deformed on the back side to create the locking head.
