Spax Facade Screws - Antique Finish - Torx - 4.5mm x 60mm - Pack of 100

Name: Spax Facade Screws - Antique Finish - Torx - 4.5mm x 60mm - Pack of 100
Brand: SPAX
SKU: wgkxujlwvb
Availability: InStock

SPAX Facade Screws - Antique Finish - Torx - 4.5mm x 60mm - Pack of 100. Use: for visible and invi...

Best current price£29.95from Tooled Up

Colour

Brown Silver

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

Tooled Up£29.95Visit shop

Spax Facade Stainless Steel Antique Finish Torx Screws

Visit shop

All Offers

2 offers from £29.95 - £50.95

View price history by clicking the chart icon.

Tooled UpSpax Facade Stainless Steel Antique Finish Torx Screws

£5.95 delivery

£29.95

Visit shop

Product Information

Full details

These SPAX Facade Screws are designed for professionals and DIY enthusiasts needing a durable and aesthetically pleasing fastener for exterior wood applications. Their key benefit is high corrosion resistance and a clean finish, ideal for visible fixings. A slight caveat is that while pre-drilling is often unnecessary, it may still be beneficial in extremely hard woods to ensure optimal performance. This guide covers their features, use, and maintenance.

All features

Colour	Brown
Model Part Number	4003530183959
Brand	SPAX

Extended Product Information

FAQs

Are these screws suitable for treated lumber?

Yes, SPAX Facade Screws are suitable for use with treated lumber due to their high corrosion resistance.

Do I need to pre-drill for softwoods?

No, the 4CUT point is designed to eliminate the need for pre-drilling in most softwoods and many hardwoods.

What is the purpose of the antique finish?

The antique brownish colouring is achieved through thermal processing and provides an aesthetic, less conspicuous look for visible exterior fixings.

What type of bit do I need for these screws?

You need a SPAX T-Star plus T20 bit for proper fit and optimal driving performance.

How do I clean the screws if they get dirty?

Wipe them with a damp cloth. Avoid abrasive cleaners.

Are these screws approved for structural applications?

Yes, they have European Technical Approval (ETA-12/0114) for use as wood connecting medium in load-bearing wood constructions.

Can I use these screws indoors?

While designed for exterior use, they can be used indoors where their corrosion resistance and aesthetic finish are desired.

Troubleshooting

Screw won't penetrate the wood

For very hard woods, pre-drilling a pilot hole is recommended. Ensure you are using the correct T-Star plus T20 bit and applying adequate pressure.

Screw head is not countersinking flush

The milling ribs should assist with countersinking. Ensure the wood surface is clean. In some dense woods, slight over-driving might be needed, but be careful not to strip the wood. Check if the pre-drilling size is correct if used.

Screw head strips during driving

Ensure you are using the correct T-Star plus T20 bit and that it is fully engaged in the screw head recess. Avoid excessive sideways force.

Wood splitting during insertion

While the 4CUT point minimizes splitting, extremely brittle woods might still be affected. Pre-drilling a pilot hole is the best solution. Ensure the screw is driven straight.

Pros and Cons

Pros

Excellent corrosion resistance for outdoor use.
Attractive antique finish blends well with natural wood.
Reduces the need for pre-drilling, saving time and effort.
Provides a secure and long-lasting wood connection.
Designed for easy driving and clean countersinking.

Cons

Antique finish might not suit all aesthetic requirements.
While often not needed, pre-drilling may be necessary for exceptionally hard woods.
Specific T-Star plus T20 bit required for optimal performance.
Pack of 100 might be insufficient for very large projects.

Setup, Compatibility & Care Instructions

Setup:

Bit Selection: Use a SPAX T-Star plus T20 bit for optimal engagement and power transmission.
Driving: Position the screw at the desired location. Apply firm, steady pressure while driving the screw using a power tool or manual screwdriver. The 4CUT point generally eliminates the need for pre-drilling, but for extremely hard woods, a pilot hole slightly smaller than the screw's core diameter is recommended.
Countersinking: The MULTIhead with milling ribs will help the head sink flush with the wood surface. Avoid overdriving, which can damage the wood surface.

Compatibility:

Wood Types: Suitable for softwoods, hardwoods, and engineered wood products.
Other Materials: Can be used in plastics and thin metal sheets (though pre-drilling is likely required for metal).
Fastener Drive: Requires a T-Star plus T20 bit.

Care:

Cleaning: Regularly inspect the screws and surrounding wood. Clean any dirt or debris with a damp cloth. Avoid abrasive cleaners.
Inspection: Periodically check for signs of wear or damage, particularly in harsh environments.
Maintenance: Due to their stainless steel A2 construction, these screws require minimal maintenance for corrosion prevention. Ensure they remain embedded in the wood and not excessively exposed to prolonged standing water.