Guard Hbv - Satin Black 5Ltr
Best current price£59.95from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£59.95Visit shop B&Q - Hbv High Build Vinyl Satin Black 5Ltr
Visit shopB&Q£59.95Visit shop One Offer
1 offer from £59.95
View price history by clicking the chart icon.
Product Information
Full details
The Guard Hbv Satin Black 5Ltr is a high-build, fast-drying, single-pack coating designed for the protection of prepared steel, with an optimized application for galvanised steel and aluminium. It offers excellent performance in environments with higher humidity and is ideal for situations where full surface preparation (ST3 / Sa2.5) cannot be achieved, making it suitable for gates, railings, and industrial plant equipment. A key benefit is its forgiving application on less-than-perfectly prepared surfaces, though its effectiveness is maximized on properly prepared substrates.
All features
| Colour | Black |
|---|---|
| Model Part Number | Hbv |
| Brand | Guard |
Extended Product Information
FAQs
What is the best surface preparation for Guard Hbv?
While it can be applied to surfaces where full ST3 / Sa2.5 preparation is not achievable, optimal performance is obtained on clean, dry steel with light abrasion or wire brushing to remove loose rust and scale. For galvanised steel and aluminium, ensure they are clean and free from contaminants.
Can this product be used on wood or plastic?
No, Guard Hbv is specifically formulated for metal surfaces like steel, galvanised steel, and aluminium. It is not designed for use on wood or plastic.
How long does it take to dry?
Drying times vary depending on temperature, humidity, and film thickness. It is a fast-drying product, but typically touch-dry within 1-2 hours and recoatable after 4-6 hours under normal conditions (20°C, 50% RH).
What type of thinner should I use?
A general-purpose vinyl thinner is usually suitable for thinning Guard Hbv and cleaning equipment. Always refer to the product's technical data sheet for specific recommendations.
Is this product suitable for marine environments?
While it offers good protection in humid environments, for severe marine exposure or immersion, a more robust, multi-coat system designed for such conditions would generally be recommended. Check the product's specific performance data for marine applications.
How many coats are recommended?
This is a high-build, single-coat product. One coat is typically sufficient to achieve the desired protection and film thickness, especially on suitably prepared surfaces.
What is the colour and finish of this product?
This specific variant is Satin Black, offering a low-sheen finish.
Troubleshooting
Coating appears uneven or streaky
Ensure the product has been thoroughly stirred before application. Use consistent application strokes and maintain a wet edge to avoid overlaps and dry patches.
Slow drying time
Drying times are dependent on temperature and humidity. Ensure application is within the recommended temperature range (typically 5-30°C) and avoid applying in very high humidity conditions if possible. Thicker application can also prolong drying.
Poor adhesion to the substrate
Verify that the surface was adequately prepared and free from contaminants like oil or grease. Ensure the surface was dry before application. For galvanised steel, ensure it is clean and has been weathered or treated appropriately if very new.
Product is too thick to apply
If necessary, the product can be thinned slightly with an appropriate vinyl thinner. Consult the product's technical data sheet for recommended thinning ratios, but avoid over-thinning as this can reduce film build and performance.
Pros and Cons
Pros
- Fast drying time reduces project duration.
- Good adhesion to galvanised steel and aluminium.
- Suitable for use in high-humidity conditions.
- Can be applied to surfaces with less than ideal preparation.
- High build formula offers good coverage in one coat.
Cons
- Requires suitable surface preparation for optimal performance.
- Best suited for specific applications (gates, railings, industrial equipment).
- Single-pack nature means it may not offer the same level of chemical resistance as two-pack systems.
Setup, Compatibility & Care
Setup: Ensure the surface to be coated is clean, dry, and free from grease, oil, and loose rust. Light abrasion or a basic clean is sufficient if full ST3 / Sa2.5 preparation is not possible. Stir the product thoroughly before application.
Compatibility: This product is designed for use on prepared steel, galvanised steel, and aluminium. It is a single-pack system and should not be mixed with other coating types unless specifically recommended by the manufacturer.
Care: Store in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the container is tightly sealed when not in use to maintain product quality. Clean application tools immediately after use with appropriate thinners.