Dare 2b Torrek III Waterproof Jacket - Pink - Size: 10

ARED 35/35K refers to the jacket's waterproof rating (35,000mm) and breathability rating (35,000g/m²/24hr). Higher numbers indicate better performance in keeping water out and allowing moisture vapor to escape.

Yes, the jacket provides high insulating performance to eliminate wind chill and is designed for use in cold conditions. For extreme cold, layering with appropriate base and mid-layers is recommended.

The technical wired adjustable hood is designed to accommodate ski helmets, offering enhanced protection and visibility on the slopes.

Machine wash on a gentle cycle at 30°C using a technical waterproof fabric detergent. Avoid bleach, fabric softener, and powder detergents. Rinse thoroughly and tumble dry on a low heat setting or hang dry.

It means the jacket is manufactured without the use of certain per- and polyfluoroalkyl substances (PFAS), which are chemicals often used in DWR treatments but are subject to environmental and health concerns. This indicates a more environmentally responsible manufacturing process.

Yes, the Durable Water-Repellent (DWR) finish can be reactivated by tumble drying on a low heat setting after washing, or reapplied using specialized DWR treatment sprays or washes available for outdoor gear.

AEP KINEMATICS is an ergonomic design technology that uses stretch fabrics and articulation at key movement points to provide unrestricted movement and enhance comfort during active use.

The Durable Water-Repellent (DWR) finish may have worn off. Clean the jacket according to care instructions and then reapply a DWR treatment, following the product's specific guidelines. A tumble dry on low heat after washing can also help reactivate the existing DWR.

Ensure the zipper area is free from debris like dirt or snow. Gently clean the zipper teeth with a damp cloth. You can also apply a small amount of wax (like beeswax) or a silicone lubricant designed for zippers to help it glide smoothly.

Check that the inner lining and any vents are not blocked. Ensure you are wearing appropriate base layers that wick moisture away. The jacket may also need to be cleaned to remove accumulated body oils and dirt that can clog the membrane.

This indicates a potential compromise in the jacket's waterproofness. Contact the manufacturer or a specialist outdoor gear repair service for advice on repair, as delaminating seam tape is difficult to fix effectively at home.