Bedec Acrylic Floor Paint - White - 2.5L
Best current price£26.39from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£26.39Visit shop B&Q - Acrylic Floor Paint Clear1L
Visit shopB&Q£26.39Visit shop All Offers
10 offers from £26.39 - £267.39
View price history by clicking the chart icon.
B&Q - Acrylic Floor Paint White1LFree delivery in 1–3 days£26.39Visit shop →
B&Q - Acrylic Floor Paint White2.5LFree delivery in 1–3 days£50.73Visit shop →
B&Q - Acrylic Floor Paint White 5LFree delivery in 1–3 days£67.49Visit shop →
B&Q - Acrylic Floor Paint White20LFree delivery in 1–3 days£267.39Visit shop →
eBayBedec Premium Acrylic Anti-Slip Floor Paint Easy Clean White 1L
Free delivery in 1–3 days
£26.39
Visit shop
Bedec Premium Acrylic Anti-Slip Floor Paint Easy Clean Clear 1LFree delivery in 1–3 days£26.39Visit shop →
BEDEC ACRYLIC FLOOR PAINT WHITE 5L£4.99 delivery£69.39Visit shop →
Bedec Premium Acrylic Anti-Slip Floor Paint Easy Clean White 5LFree delivery in 1–3 days£69.99Visit shop →
Bedec Premium Acrylic Anti-Slip Floor Paint Easy Clean White 20LFree delivery in 1–3 days£267.39Visit shop →
Product Information
Full details
Bedec Acrylic Floor Paint in White (2.5L) is designed for homeowners and professionals looking to refresh and protect various indoor floor surfaces. Its key benefit is offering a durable, easy-to-clean finish that withstands high traffic. A potential caveat is that optimal results depend on proper surface preparation.
All features
| Colour | White |
|---|---|
| Model Part Number | BEDE2FF0002/40 |
| Brand | Bedec |
Extended Product Information
FAQs
What surfaces can Bedec Acrylic Floor Paint be used on?
It can be applied to various interior floor surfaces including concrete, wood, and other prepared substrates.
How long does it take to dry?
The paint is quick-drying, typically allowing recoating after 2-4 hours, but full curing can take several days.
Can this paint be used outdoors?
No, this product is designed for interior use only.
How do I clean the painted floor?
Clean spills promptly. For general maintenance, use a soft brush or cloth with mild detergent and water. Avoid abrasive cleaners.
Do I need to prime the floor before painting?
Priming is recommended for porous surfaces like bare concrete or wood to ensure optimal adhesion and a uniform finish.
What is the coverage of a 2.5L can?
Coverage can vary based on surface porosity and application thickness, but typically a 2.5L can covers approximately 10-12 square meters per coat.
Can I apply this over existing floor paint?
Yes, provided the existing paint is sound and properly prepared (cleaned and lightly abraded if glossy).
Troubleshooting
Paint not adhering well
Ensure the surface was properly cleaned, degreased, and sanded if necessary. Check if an appropriate primer was used on porous surfaces.
Uneven finish or brush marks visible
Apply paint in thin, even coats. Avoid overworking the paint. Ensure consistent application speed and direction, especially when using a roller.
Slow drying time
Ensure application in a well-ventilated area with moderate temperature and humidity. High humidity or low temperatures can significantly slow drying.
Scuffing or scratching after drying
Allow paint to cure fully (can take several days to a week). Ensure sufficient coats were applied and that the surface was adequately prepared.
Pros and Cons
Pros
- Durable finish suitable for high-traffic areas.
- Quick-drying formula saves time during application.
- Easy to clean and maintain.
- Applicable to various floor surfaces.
- Enhances the aesthetic of any space.
Cons
- Requires thorough surface preparation for best results.
- Primarily for indoor use.
- Specific drying and recoating times may vary with environmental conditions.
- May require multiple coats for complete coverage.
Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from grease, dust, and loose material. For best adhesion, prime porous surfaces like bare concrete or wood. Sand any existing glossy finishes to create a key.
Compatibility: Suitable for concrete, wood, and other prepared interior floor surfaces. Not recommended for exterior use or areas subject to constant water immersion.
Application: Apply with a brush, roller, or sprayer. Use thin, even coats. Allow adequate drying time between coats as per manufacturer guidelines, typically 2-4 hours.
Care: Clean spills immediately. For routine cleaning, use a soft brush or cloth with mild detergent and water. Avoid abrasive cleaners or heavy scrubbing.