Dylon Hand Fabric Dye - Ocean Blue

This dye is specifically formulated for natural fabrics such as cotton, linen, viscose, wool, and silk. It will not work on synthetic materials like pure polyester, acrylic, or nylon.

Yes, you will need 250g of ordinary salt for each 50g pack of Dylon Hand Fabric Dye. The salt helps the dye to absorb properly into the fabric.

One 50g pack is designed to dye up to 250g (approximately 8.8 oz) of dry fabric to a full, rich shade. For larger amounts of fabric, the color will be lighter.

The final color can be influenced by the fabric's original color. Dylon dyes follow color mixing rules; for example, using Ocean Blue dye on a yellow fabric will result in a greenish hue. The fabric type and how consistently the fabric was stirred can also affect the outcome.

No, Dylon Hand Fabric Dye is specifically designed for hand application in a bowl or sink. For machine dyeing, look for Dylon's machine dye products.

Ensure your fabric is thoroughly wet and free of dry spots before placing it in the dye bath. Stir the fabric continuously for the first 15 minutes, then regularly for the remaining 45 minutes to ensure the dye is distributed uniformly.

After dyeing, rinse the fabric in cold water until the water runs clear. For the first few washes, wash the dyed item separately to prevent any color transfer. Dry away from direct heat and sunlight to maintain color vibrancy.

Ensure the fabric was thoroughly damp before placing it in the dye bath. Stir the fabric continuously for the first 15 minutes and regularly for the remaining 45 minutes to distribute the dye evenly. Make sure the dye was fully dissolved before adding it to the bath.

Verify that you used 250g of ordinary salt, which is crucial for dye uptake. Check if the fabric weight exceeded 250g for one pack, as this will result in a lighter shade. Ensure the water temperature was approximately 40°C.

Confirm that the fabric is made of natural fibers (cotton, linen, viscose, wool, silk) and does not have any special finishes (e.g., stain-resistant, waterproof). Synthetic fabrics will not absorb the dye. Also, ensure the correct water temperature was used.

After dyeing, rinse the fabric in cold water until the water runs completely clear before washing. For the first few washes, always wash the newly dyed item separately from other laundry to prevent color transfer.

Always use a stainless steel sink or a dedicated plastic basin that is either disposable or easily cleaned. Rinse the sink/container immediately and thoroughly with water and a mild cleaner after removing the fabric to prevent dye from setting.