The interBär pull switch features a white design and supports an off/on functionality with a 6 A c...The interBär pull switch features a white design and supports an off/on functionality with a 6 A current rating. It is a cord intermediate switch suitable for use in lighting applications up to 250 V. Ideal for lamps and other lighting fixtures, it offers convenient operation through a simple pull mechanism. The housing and strain relief are screwed, with head contact screws and one connection terminal. Suitable for secondary side switching of halogen lamps. Technical data: Design: 1-pin, breaker. Colour: white. Switching power: 6 (4) A/50 V/AC.
Best current price£5.18from Rapid Online - Rapid Electronics Ltd.
This interBär pull switch is designed for users needing a simple, reliable on/off control for lighting fixtures, particularly lamps and secondary side halogen setups. Its key benefit is the convenient pull-cord operation and a 6A current rating for robust performance. A potential consideration is its specific application focus, primarily for lighting circuits. This white, 1-pin breaker switch offers straightforward functionality with secure screw housing and strain relief.
All features
Colour
White
Model Part Number
622476
Brand
interBär
Extended Product Information
FAQs
What is the maximum current rating for this pull switch?
The interBär pull switch has a maximum current rating of 6 A.
Can this switch be used for dimming lights?
No, this is a standard on/off pull switch and does not support dimming functionality.
What type of lamps is this switch best suited for?
It is ideal for general lighting applications and specifically designed for the secondary side switching of halogen lamps.
Is this switch suitable for outdoor use?
This switch is designed for indoor lighting applications and is not rated for outdoor use.
How do I reset the switch if it stops working?
This is a simple mechanical switch. If it stops working, check wiring and connections. If the internal mechanism is faulty, replacement is recommended.
What voltage can this switch handle?
The switch is rated for use up to 250 V.
Can I use this switch with LED lights?
Yes, it can be used with LED lights as long as their power consumption does not exceed the switch's 6A rating and they are compatible with switched circuits.
Troubleshooting
Switch not turning light on/off
Verify power is connected to the circuit. Check that the wires are securely connected to the terminal inside the switch. Ensure the cord is properly seated in the strain relief.
Intermittent operation
Inspect the internal connections for looseness or corrosion. Ensure the pull cord is moving freely and not obstructed. Check for any physical damage to the switch housing.
Switch feels stiff when pulling cord
Ensure the cord is not twisted or caught on anything. Check that the strain relief is not overtightened, pinching the cord. Clean the internal mechanism if debris is suspected.
Pros and Cons
Pros
Easy and intuitive pull-cord activation
Adequate 6A rating for most lighting needs
Neutral white color fits most decors
Simple, reliable on/off switching mechanism
Secure installation with screwed housing
Cons
Limited to on/off functionality (no dimming)
Primarily designed for lighting circuits
Requires manual installation and wiring
Not suitable for high-power appliances
Setup, Compatibility & Care
Setup:
Ensure the power to the lighting circuit is turned off at the breaker.
Open the housing by unscrewing the cover.
Insert the power cord through the strain relief.
Connect the wires to the appropriate terminal, ensuring a secure connection.
Close and screw the housing securely.
Re-apply power to the circuit.
Compatibility:
Suitable for use with lighting circuits up to 250 V and 6 A.
Ideal for secondary side switching of halogen lamps.
Compatible with cords requiring intermediate switching.
Care:
Clean with a dry or slightly damp cloth. Avoid abrasive cleaners.
Periodically check the cord and connections for wear or damage.