Joie i-Spin 360 i-Size 0+1 Car Seat - Shale

The Joie i-Spin 360 is suitable from birth up to approximately 4 years of age, or for children measuring 40 cm to 105 cm in height, with a maximum weight of 18 kg.

No, the Joie i-Spin 360 is an ISOFIX-only car seat and cannot be installed using a vehicle's 3-point seatbelt. It requires ISOFIX anchorage points and a support leg for secure installation.

According to i-Size regulations, your child must be at least 15 months old and 76 cm tall before they can travel forward-facing. However, it is highly recommended to keep your child rearward-facing for as long as possible (up to 105 cm) for enhanced safety.

The fabric covers are typically removable and can be machine washed on a gentle cycle with cold water. Always refer to the specific care label on your seat's fabric for detailed instructions. Plastic parts can be wiped clean with a damp cloth and mild soap. Do not use harsh chemicals or abrasive cleaners.

No, it is only compatible with i-Size approved vehicles that are equipped with ISOFIX anchorage points. Always check your vehicle's owner's manual or the car seat manufacturer's vehicle fit list to confirm compatibility before purchase and installation.

The newborn insert should be removed when your child no longer fits comfortably with it, typically when they are around 60 cm in height, or as indicated in the user manual. Its purpose is to provide proper support and positioning for infants.

Ensure the car seat is not fully reclined, as some recline positions may restrict rotation. Also, check that the support leg is correctly positioned and not interfering with the base mechanism. Some models require a specific button or lever to be pressed to enable rotation.

Fully extend the ISOFIX connectors, firmly push the car seat into the vehicle's anchorage points until you hear a click, and then push the car seat firmly against the vehicle's seat back. Ensure the support leg is extended firmly to the floor until its indicator also turns green. There should be no gap between the car seat base and the vehicle seat.

Check that the harness straps are not twisted behind the child or within the car seat shell. Ensure the child's clothing isn't snagging the straps. Pull the harness adjustment strap smoothly and directly from the front of the seat. If the issue persists, check for any obstructions in the tightening mechanism and ensure the recline position allows for proper harness movement.

Adjust the recline position of the car seat to a more reclined angle to provide better head support for your sleeping child. Ensure the headrest is correctly adjusted to their height, with the harness straps coming from just above their shoulders.

Double-check all installation steps: ensure ISOFIX connectors are fully engaged and green, the support leg is firmly on the floor with its indicator green, and the car seat is pushed firmly against the vehicle's seat back. There should be minimal movement (less than 1 inch) at the point where it attaches to the vehicle. If issues persist, refer to the user manual or contact Joie customer service.