Farrow & Ball Wood Primer & Undercoat - Mid Tones - 750ml

This primer is suitable for bare or previously painted interior and exterior wood, including floorboards and knots.

A 750ml tin will cover up to 9m² on average, but this can vary depending on the surface and application method.

Allow the primer to dry for 11 hours before applying your chosen topcoat.

No, this primer is specifically designed for use on wood surfaces only.

Clean your brushes, rollers, and other equipment with warm, soapy water immediately after use.

Light sanding is recommended, especially for previously painted surfaces or when dealing with imperfections, to ensure better adhesion.

Yes, this primer is suitable for both interior and exterior wood surfaces.

Ensure the primer has fully dried before applying the topcoat. Also, make sure the surface was properly prepared and primed.

Ensure you are applying an even coat of primer. If using a brush, avoid applying too much paint at once. If spraying, check the settings and distance from the surface.

Ensure you are using the correct application method. Make sure not to overload the brush. Use a roller for a smoother finish.