Groutin - Tile Grout Paint 125ml - Designed to Restore Tile Grout - Black

The grout must be clean, dry, and free from any dirt, grease, or loose particles. A thorough cleaning and complete drying time are essential for optimal adhesion.

Yes, this black grout paint is designed to cover existing grout colors and stains, providing a uniform black finish.

Drying times can vary based on humidity and application thickness. Refer to the product packaging for specific drying and curing times, but generally, it requires a few hours to dry to the touch and longer to cure fully.

Clean with a soft, damp cloth. Avoid using abrasive cleaners or power washers, as these can wear down the paint over time.

The 125ml bottle is suitable for small to medium-sized areas. Coverage depends on the width and condition of the grout lines, but it's generally sufficient for most kitchen backsplash or bathroom floor grout refreshes.

It is recommended to clean the grout thoroughly and ensure any old sealers are removed or at least scuffed to allow for proper adhesion. If unsure, test in a small area first.

Wipe excess paint off the tiles immediately with a damp cloth before it dries. If it has dried, you may need to carefully scrape it off with a plastic scraper or use a specialized tile cleaner, testing in an inconspicuous area first.

Ensure grout is thoroughly clean and dry before application. Remove any existing sealers or coatings if present, as they might hinder adhesion.

Apply thin, even coats. Allow each coat to dry according to instructions before applying the next. Ensure consistent pressure and coverage.

Wipe away excess paint immediately with a damp cloth before it dries. If dry, a careful application of a tile cleaner or a fine-grit sanding sponge might remove it, but test in a hidden spot first.

Apply a second coat. Ensure the grout is completely dry between coats. For very deep stains, a primer specifically for grout might be beneficial, though not typically required for this product.