Automotive Paint Sprayer - 400ml - Black

This spray paint is designed for use on a wide variety of surfaces including metal, plastic, wood, and glass, suitable for both interior and exterior applications.

The paint is quick-drying. Typically, it will be dry to the touch within minutes, but allow for adequate drying time (usually 10-15 minutes) between coats for optimal results.

While the paint is designed to adhere well, priming is recommended for certain surfaces, especially if they are very smooth, porous, or if you require maximum durability or color consistency. Always clean and prepare the surface first.

After use, turn the can upside down and spray for a few seconds until clear propellant emerges. This prevents the nozzle from clogging.

Yes, it is designed as automotive paint and is suitable for touch-ups and applications on car parts. For large areas or a factory-finish look, professional spray equipment might yield better results.

Apply the paint in thin, even coats using a consistent sweeping motion. Hold the can about 8-12 inches away from the surface. Avoid applying too much paint in one pass.

Yes, the paint is suitable for exterior usage and provides a durable finish that can withstand environmental conditions.

Shake the can more vigorously. Ensure the nozzle is not blocked. If blockage persists, try clearing it with a fine wire or pin after ensuring the can is depressurized and cool.

You may be holding the can too close or applying too heavily. Use lighter, thinner coats and maintain a consistent distance of 8-12 inches. Allow proper drying time between coats.

Ensure the surface was properly cleaned and prepared (e.g., free of grease, dust, and rust). Light sanding may be required for smooth surfaces. Apply in appropriate environmental conditions (not too cold or humid).

Check if the nozzle is clogged. Ensure the can has been shaken adequately. If the can is new, the seal may not have been fully removed. Confirm the temperature is within the recommended range for application.