Liberon - Dark Oak - 5 Litre - attributes: brand:Liberon, colour_family:Brown, mpn:014406
Liberon Palette Wood Dye Dark Oak is a water-based, acrylic dye designed for coloring interior bar...Liberon Palette Wood Dye Dark Oak is a water-based, acrylic dye designed for coloring interior bare wood while preserving the natural beauty of the grain. It is suitable for both soft and hardwoods and is ideal for use on floors. The dye is available in a variety of wood shades that can be mixed to create unique colors. Additionally, it is safe for use on toys. Technical specifications Type: Water-based acrylic dye Coverage: 8-16 m² Drying time: Minimum 2 hours Application method: Foam applicator or brush Tool cleaning: Water Compatibility and accessories Can be mixed with Liberon Natural Finish Varnishes Usage Suitable for use on floors Endorsed by the Guild of Master Craftsmen Suitable for kitchens and bathrooms
The Liberon Palette Wood Dye in Dark Oak is a water-based acrylic dye for interior bare wood, ideal for users seeking to enhance wood grain while achieving a rich, dark oak finish. Its key benefit lies in its ability to color effectively on both soft and hardwoods, including suitability for floors. A potential consideration is that it requires proper preparation of bare wood for optimal results.
All features
Colour
Brown
Model Part Number
014406
Brand
Liberon
Extended Product Information
FAQs
Can I use this dye on pre-finished wood?
No, this dye is designed for use on bare wood only. Any existing finishes must be completely removed before application.
How long does the dye need to dry before applying a topcoat?
You must allow a minimum of 2 hours for the dye to dry. The surface should be completely dry to the touch before applying a protective varnish like Liberon Natural Finish Varnishes.
Can I mix this dye with other Liberon wood dyes?
Yes, the Liberon Palette Wood Dyes are designed to be mixed together to create custom wood shades.
Is this product suitable for outdoor use?
No, this product is specifically designed for interior use on bare wood.
How should I clean my tools after using the dye?
Tools such as brushes and foam applicators should be cleaned immediately after use with water.
What is the coverage rate of this dye?
The coverage is approximately 8-16 m² per litre, depending on the porosity of the wood and the application method.
Can I use this on MDF or plywood?
Yes, it can be used on manufactured wood products like MDF and plywood, provided the surface is bare and prepared correctly. However, results may vary due to the uniform nature of these materials.
Troubleshooting
Dye not penetrating evenly
Ensure the wood surface is completely bare and free from any oils, waxes, or previous finishes. Sand the wood smooth and ensure it is free of dust before application.
Color is too light
Allow the first coat to dry completely and apply a second thin coat. For significantly deeper color, multiple coats may be necessary, or consider mixing with a darker shade.
Streaking or brush marks visible
Apply the dye in thin, even coats, working with the direction of the wood grain. Avoid over-brushing. Ensure consistent pressure and overlap slightly on each stroke.
Wood appears blotchy
This can occur with certain woods, especially pine. Apply a pre-dye conditioner or a thin coat of watered-down varnish before applying the dye to help ensure a more uniform absorption.
Pros and Cons
Pros
Water-based formula, easy to clean tools with water.
Enhances the natural beauty of wood grain.
Suitable for application on floors.
Can be mixed to create custom wood shades.
Safe for use on children's toys.
Durable finish suitable for kitchens and bathrooms.
Cons
Requires bare wood for application.
Drying time of a minimum of 2 hours between coats.
Coverage can vary based on wood porosity.
May require multiple coats for deeper coloration.
Setup, Compatibility & Care
Setup:
Ensure the wood surface is bare, clean, dry, and free from dust, grease, or old finishes.
Lightly sand the surface if necessary and wipe away dust.
Stir the dye thoroughly before and during application.
Apply a thin, even coat using a foam applicator or brush. Work with the direction of the wood grain.
Allow a minimum of 2 hours for drying. For a deeper color, apply a second coat after the first has dried.
Compatibility:
This dye is compatible with Liberon Natural Finish Varnishes for protection after application.
It is designed for use on interior bare wood, including softwoods and hardwoods.
Suitable for application on wooden floors, in kitchens, and bathrooms.
Care:
Clean application tools (foam applicator, brush) immediately after use with water.
Once sealed with a varnish, the dyed surface can be cleaned with a damp cloth. Avoid abrasive cleaners.
Power Tools Direct£7.36Visit shop 
B&Q£10.45Visit shop 
The Range£11.67Visit shop 
