Best current price£11.67from The Range
Shopping.co.uk recommended and popular offers
The Range£11.67Visit shop Jrp Riveting Products M8 X 18.5 Steel Flat Head Rivet Nuts - Grey
Visit shop41 offers from £11.67 - £29.14
View price history by clicking the chart icon.
The JRP Riveting Products M8 x 18.5 Flat Head Rivet Nuts are essential hardware components designed for fabricators and DIY enthusiasts who require secure, permanent threaded mounting points in thin-gauge materials. These durable steel fasteners provide a high-strength, flush-finish connection that holds firm under vibration, though they do require a specific rivet nut installation tool for proper deployment.
| Colour | Grey |
|---|---|
| Model Part Number | 1269317 |
| Brand | JRP Riveting Products |
You should use a drill bit that matches the outer diameter of the rivet body, typically slightly larger than the nominal diameter to allow for a snug, non-deforming fit.
While it is technically possible to use a manual bolt-and-nut compression method, a dedicated rivet nut setting tool is highly recommended for consistent results.
Being made of steel, they are strong but can rust if exposed to moisture. If used outdoors, consider applying a rust-preventative coating or sealant.
The knurled body increases friction against the host material, preventing the insert from rotating when you tighten or loosen the bolt fastened into it.
These are designed for metal applications where the metal can be deformed to create a secure clamp. They are generally not suitable for plastic.
The pilot hole may be too large, preventing the knurls from biting into the material. Use a smaller drill bit or ensure the hole is not deformed.
Ensure you are using the correct bolt pitch and that the bolt is not being over-torqued beyond the material limits.
To install these rivet nuts, you must first drill a precision pilot hole that matches the outer diameter of the rivet body. Once the hole is drilled and deburred, thread the rivet nut onto the mandrel of your installation tool. Insert the nut into the hole and actuate the tool to collapse the shank, creating a flange on the reverse side of the material.
Ensure that you are using a tool compatible with M8 hardware. To maintain the integrity of the threads, avoid cross-threading during the bolt installation process, and consider using a light coat of anti-seize compound if the fasteners will be exposed to outdoor or corrosive environments.
