MENIBBLER Sink Mixer Tap - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The MENIBBLER Black Sink Mixer Tap is an ideal choice for homeowners looking for a reliable, dual-lever kitchen fixture that prioritizes durability and ergonomic functionality. It excels in busy kitchens due to its 360-degree swivel spout and robust ceramic disc technology, though it is specifically designed for 2-hole sink configurations, which may limit its compatibility with single-hole modern sink setups.
All features
| Colour | Black |
|---|---|
| Brand | MENIBBLER |
Extended Product Information
FAQs
Can I install this on a single-hole sink?
No, this model requires a 2-hole sink installation with 180mm centers.
Is the finish prone to scratching?
The black finish is durable, but it should be cleaned with non-abrasive cloths to maintain its appearance.
Does this tap come with flexible tails?
Yes, the tap includes flexible connectors compatible with standard UK plumbing fittings.
What is the maximum sink thickness this tap supports?
It is designed to be installed on workbenches or sinks up to 35mm thick.
How long should the ceramic cartridge last?
The cartridge has been tested for 500,000 cycles, offering years of reliable, drip-free service under normal use.
What size hole is required for the installation?
The installation holes in the sink should be between 20mm and 32mm in diameter.
Troubleshooting
Water leaking from the base of the handle
Check if the locking nut has loosened over time and tighten it carefully, or inspect the O-ring seal for signs of wear.
Water flow is reduced
Check the aerator at the end of the spout for limescale buildup and soak it in a vinegar solution to clear any blockages.
Pros and Cons
Pros
- Durable solid brass construction
- Smooth, drip-free operation
- Extensive spout rotation for sink access
- Includes all necessary mounting hardware
Cons
- Requires a 2-hole sink setup
- Not compatible with single-hole sink configurations
- Limited to 35mm thick workbenches
Setup, Compatibility & Care
Installation requires a 2-hole sink configuration with a standard center distance of 180mm. The unit is designed to fit workbenches up to 35mm thick, with mounting holes ranging from 20mm to 32mm in diameter.
- Ensure the water supply is isolated before beginning installation.
- Use the provided flexible connectors to attach to standard UK water supply fittings.
- Secure the tap using the included mounting hardware, ensuring the seals are seated correctly to prevent leaks.
For maintenance, clean the black finish with a soft, damp cloth and mild soap. Avoid abrasive sponges or harsh chemical cleaners, as these may compromise the protective finish.