Pine Hockey Stick Moulding - B&Q - Hockey Stick

You will need a measuring tape, saw, adhesive or nails, hammer, wood filler, sandpaper, and paint or stain.

Yes, the pine moulding can be painted or stained to match your existing decor. Ensure you prime the surface before painting.

Use a saw to cut the moulding to the required lengths. A mitre saw will provide the most accurate cuts.

Use a construction adhesive suitable for wood and the surface you are attaching the moulding to. Follow the adhesive manufacturer's instructions.

Clean the moulding regularly with a damp cloth to remove dust and dirt. Avoid using harsh chemicals.

While the moulding can be used in bathrooms, ensure it is properly sealed and protected from moisture to prevent damage.

Each moulding piece is 2.4 meters long.

The moulding has the following dimensions: (L)2.4m x (W)2.6cm x (T)8mm.

Ensure the surface is clean and dry before applying adhesive. Use an appropriate adhesive for the surface material. Consider using nails in addition to the adhesive for extra hold.

Double-check measurements and ensure the moulding is level before securing it. Use clamps to hold the moulding in place while the adhesive dries.

Use wood filler to fill gaps and cracks. Sand the filled areas smooth before painting or staining.