Metsä Wood - Smooth Planed Whitewood Spruce Stick Timber - 2.4M - 44mm - 12mm

PSE stands for "Planed Square Edge." This means the timber has been machined on all four sides to have smooth, consistent, and square edges, making it easier to work with and ensuring accurate dimensions for your projects.

This Whitewood Spruce timber is primarily intended for internal use. If you plan to use it in a sheltered outdoor area, it must be thoroughly treated with appropriate wood preservatives and sealed with exterior-grade paint or stain to protect it from moisture, rot, and insect damage.

Yes, this timber takes paint, stain, varnish, and wax very well due to its smooth, planed surface. Always prepare the surface by ensuring it's clean, dry, and lightly sanded with fine-grit sandpaper (e.g., 180-220 grit) for the best results and adhesion.

This versatile size is excellent for many interior non-structural projects, including creating battens for wall panels, small internal framing, decorative trim, cabinet work components, shelf supports, or as infill strips.

Store any leftover timber flat, stacked neatly, and off the ground, preferably in a dry, cool environment with consistent humidity. Using battens or small pieces of wood between layers helps maintain airflow and prevent warping or twisting.

No, this Whitewood Spruce timber, especially at 12mm thickness, is considered softwood and is not designed for heavy structural or load-bearing applications. It is best suited for non-structural internal work where durability and ease of handling are key.

Ensure proper storage by stacking the timber flat on a level surface in a dry, temperature-controlled environment. Allow it to acclimatize to your working space for several days before use. In some cases, minor warps can be straightened during installation if adequately clamped.

Always use a very sharp saw blade designed for cutting wood. Support the timber firmly on both sides of the cut line to minimize vibration. For power tools, consider a blade with more teeth for smoother cuts and reduce the feed rate.

Pre-drill pilot holes before inserting screws or nails, especially when fastening near the ends or edges of the timber. Ensure the pilot hole diameter is slightly smaller than the screw's core or nail's shank.

Before applying any finish, ensure the timber surface is completely clean, dry, and free of dust, grease, or previous coatings. Lightly sand the surface with fine-grit sandpaper (e.g., 180-220 grit) to create a better key for the finish, then wipe clean before application.