Shopping.co.uk

Soho Lighting Camden Collection Matt Black 20A 6 Gang Dimming Toggle Switch - Black

Soho Lighting Camden Collection Matt Black 20A 6 Gang Dimming Toggle Switch - Black

The Soho Lighting Camden Collection Matt Black 6 Gang Dimming Toggle Switch features six independe...

Best current price£260.00from Elesi.com

Colour
BlackGold

Best offers

Shopping.co.uk recommended and popular offers

One Offer

1 offer from £260.00

View price history by clicking the chart icon.

Elesi.comSoho Lighting Black Matt 6 Gang Dimming Toggle Switch
Free delivery in 1–3 days
£260.00
Visit shop

Product Information

Full details

This Soho Lighting Camden Collection Matt Black 6 Gang Dimming Toggle Switch is designed for homeowners and electricians seeking to control and dim multiple lighting circuits from a single, elegant location. Its key benefit is the ability to independently dim six separate lighting circuits, enhancing ambiance and saving energy. A primary consideration is the requirement for a deep, multi-gang back box due to the integrated dimmer modules. This switch offers a screwless, low-profile matt black finish with advanced dimming technology for up to 250W of LED lighting per circuit.

All features

ColourBlack
Model Part Number15399528595841
BrandSoho Lighting

Extended Product Information

FAQs

What is the maximum wattage per circuit this switch can dim?

Each of the six gangs can control and dim up to 250W of LED lighting.

Can I use this switch with non-LED bulbs?

The Enkin IDM250 modules are specifically designed and optimized for LED lighting. Compatibility with other bulb types like incandescent or halogen may be limited and is not guaranteed. It is best to use dimmable LED bulbs.

What type of back box do I need for installation?

Due to the size of the six integrated dimmer modules and the required wiring space, you will need a large, deep multi-gang back box that complies with standard wiring space regulations.

How do I set up dimming for multiple locations?

For multi-location dimming on a single circuit, you only need one Soho Lighting Camden 6 Gang Dimming Toggle Switch. Any additional control points for that same circuit must be wired using standard retractive (momentary) switches.

What does the 'soft-start' function do?

The soft-start function gently increases the light brightness over one to two seconds when the switch is activated. This prevents sudden thermal shock to LED bulbs, extending their lifespan and reducing wear.

Is this switch compatible with smart home systems?

This is a traditional toggle dimming switch and does not have built-in smart home connectivity. For smart control, you would typically integrate smart lighting components or smart switches separately.

What is the warranty on the Enkin dimmer modules?

The Enkin dimmer modules fitted in this switch come with a five-year manufacturer's guarantee.

How do I clean the matt black finish?

Clean the surface with a soft, slightly damp cloth. Avoid abrasive cleaners or solvents to protect the finish.

Troubleshooting

Switch not responding or lights not dimming.

Ensure the circuit breaker is on and the wiring is correct. Verify that the LED bulbs are compatible with the dimmer and are within the 250W limit per gang. Check that only one dimming switch is used per circuit, with retractive switches for other locations.

Lights flicker when dimmed.

Confirm that the LED bulbs are dimmable and compatible with the Enkin IDM250 dimmer. Try increasing the load slightly if possible, or consult the bulb manufacturer for recommended dimmer types.

Unit feels warm during operation.

Some warmth is normal, especially when operating near the 250W limit. However, if the unit feels excessively hot, switch off the power and check for overloaded circuits or faulty wiring. Ensure adequate ventilation around the back box.

Front plate does not sit flush.

Ensure the back box is correctly installed and recessed into the wall. Check that all wiring is neatly tucked away within the back box and not obstructing the front plate. The screwless plate should clip firmly into place.

Pros and Cons

Pros

  • Provides independent dimming control for six lighting circuits in one unit.
  • Features advanced Enkin dimmer technology with soft-start and flicker-free operation.
  • Sleek, modern screwless design with a premium matt black finish.
  • Enhances room ambiance and allows for energy savings through dimming.
  • Includes robust safety features like overload and short-circuit protection.

Cons

  • Requires a deep, multi-gang back box for installation.
  • Only one dimming switch per circuit is needed; additional control points must use retractive switches.
  • Primarily designed for LED lighting, compatibility with other bulb types may be limited.
  • Installation may require specialized knowledge due to the multi-gang configuration and integrated modules.

Setup, Compatibility & Care Instructions

Setup: This unit requires a large, deep multi-gang back box to accommodate the six integrated dimmer modules and wiring. Ensure the back box is securely fixed and wired in accordance with local electrical regulations. Each dimming circuit requires a single dimming toggle switch; for multi-location control on the same circuit, use retractive (momentary) switches at additional locations. Refer to the Enkin module documentation for the specific push-button configuration routine if needed.

Compatibility: The Enkin IDM250 modules are rated for up to 250W of LED lighting per circuit. It is essential to verify the compatibility of your LED bulbs with this type of dimmer, as some low-power or incompatible LEDs may not dim correctly. For multi-point dimming, only one IDM250 is required per circuit; other points must use retractive switches.

Care: The matt black finish can be cleaned with a soft, slightly damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish. Ensure the power is switched off at the consumer unit before cleaning.

Price History

DatePrice
Visit shop