Best current price£4.51from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£4.51Visit shop Tetrion Fillers Blue Emb406 Easy Spray Mid 400Ml Emb406
Visit shop
Debenhams£9.96Visit shop Tetrion Unisex Blue Easy Spray Mid 400Ml - Emb406
Visit shop12 offers from £4.51 - £62.99
View price history by clicking the chart icon.
This guide is for DIY enthusiasts, hobbyists, and professionals seeking a versatile and easy-to-use spray paint for various projects. The Tetrion All Purpose Easy Spray Paint in Mid Blue offers fast coverage and a quick-drying finish for interior and exterior applications on multiple surfaces. A key consideration is that optimal performance is achieved at room temperature, with performance potentially reduced in colder conditions.
| Colour | Blue |
|---|---|
| Model Part Number | EMB406 |
| Brand | Tetrion |
The paint is touch dry in 10-15 minutes and fully hardened in approximately 24 hours.
This paint is designed for hard surfaces like wood, metal, ceramic, and plastic. It is not recommended for use on fabric.
After each use, invert the can and spray for a few seconds until only clear propellant emerges. This clears any residual paint from the nozzle.
Yes, it is suitable for exterior use. However, for maximum durability in harsh conditions, ensure proper surface preparation and consider a clear protective topcoat.
The paint performs best when stored and used at room temperature. Performance may be reduced below 10°C.
For best results and even coverage, it is recommended to apply multiple thin coats rather than one thick coat. Allow adequate drying time between coats.
Ensure the can has been shaken vigorously for at least 2 minutes. Invert the can and spray briefly to clear any potential nozzle blockage. Check that the nozzle is clean.
Maintain a consistent distance of 20-30 cm from the surface. Apply paint in thin, even coats rather than one heavy coat. Ensure the can is shaken regularly during use.
Ensure the surface is clean, dry, and free from grease, dust, or rust. For certain materials like plastics, a suitable primer might be necessary. Test adhesion in a small, hidden area first.
Ensure the environment is at room temperature (ideally above 10°C). High humidity can also affect drying times. Avoid applying heavy coats in humid or cold conditions.
Preparation: Ensure the surface to be painted is clean, dry, and free from grease or dust. For non-porous surfaces, a primer may enhance adhesion.
Usage: Shake the can vigorously for a minimum of 2 minutes before and regularly during use. Hold the can upright, 20-30 cm from the surface, and apply in smooth, even strokes, moving from side to side or up and down. For best results, apply multiple thin coats rather than one thick coat.
Post-Use: After each use, invert the can and spray for a few seconds to clear the nozzle and prevent clogging.
Storage: Store and use the paint at room temperature. Performance may be reduced if used below 10°C.
Compatibility: Suitable for wood, metal, ceramic, and plastic surfaces. Always test on an inconspicuous area first if unsure.
