Dynasty Hardware Door Closer Heavy Duty Commercial Grade Hydraulic Adjustable Spring Door Closer Series 4401 - Bronze
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This heavy-duty hydraulic door closer from Dynasty Hardware is designed for commercial environments, offering reliable and adjustable door control. It is suitable for high-traffic areas and ensures doors close smoothly and securely. A key benefit is its universal installation flexibility, though users should note that it is primarily a closer body and requires separate arm attachment.
All features
| Colour | Bronze |
|---|---|
| Model Part Number | DYN-4401-DURO |
| Brand | Dynasty Hardware |
Extended Product Information
FAQs
What is the difference between regular arm, top-jamb, and parallel arm installation?
These refer to how the closer arm is mounted. Regular arm mounts on the door, top-jamb on the frame, and parallel arm uses a special bracket to mount the arm parallel to the door. The Series 4401 supports all three with the correct arm assembly.
Does this door closer come with the arm assembly?
No, the Dynasty Hardware Door Closer Series 4401 is the closer body only. The appropriate arm assembly (regular, top-jamb, or parallel) must be purchased separately.
What is 'Back-Check'?
Back-check is a function that slows down the door's opening swing before it reaches its maximum opening point, preventing it from slamming against the wall or frame.
Is this closer suitable for exterior doors?
Yes, it is suitable for exterior doors, especially in commercial settings, due to its heavy-duty construction and weather-resistant bronze finish.
How do I adjust the closing speed?
There are adjustment screws on the closer body, typically labeled for closing speed and latching speed. Turning these screws clockwise or counter-clockwise will slow down or speed up the respective actions.
What is the warranty period for this door closer?
Please refer to the specific warranty information provided by Dynasty Hardware or the retailer for the Series 4401 closer. Commercial grade products often come with limited warranties.
Can I use this on a very light interior door?
While it can be adjusted for lighter doors, it's a heavy-duty commercial-grade closer. For very light residential interior doors, a lighter-duty closer might be more appropriate to avoid over-specification and potential difficulty in adjustment.
Troubleshooting
Door closes too slowly or not at all
Increase the main closing spring tension using the adjustment screw. Ensure the closing speed adjustment is not set too slow.
Door closes too quickly or slams
Decrease the main closing spring tension. Adjust the closing speed screw to slow down the closing action.
Door does not latch properly
Adjust the latching speed screw to ensure the door reaches the frame with enough momentum to engage the latch.
Door hits the wall when opened
Adjust the back-check function to engage at the desired opening angle. Ensure the back-check valve is properly set.
Closer is leaking fluid
Cease use and contact Dynasty Hardware customer support or a qualified technician. Fluid leaks indicate internal seal failure.
Pros and Cons
Pros
- Durable construction for commercial use
- Versatile installation options (regular, top-jamb, parallel arm)
- Adjustable closing speed and back-check for controlled operation
- UL listed for fire safety compliance
- Non-handed design simplifies inventory and installation
Cons
- Requires separate purchase of the appropriate door closer arm
- May be over-specified for very light-duty residential applications
- Bronze finish may not match all décors
- Adjustment can require fine-tuning for optimal performance
Setup, Compatibility & Care Instructions
Setup:
- Determine the required installation type: Regular Arm, Top-Jamb, or Parallel Arm.
- Ensure you have the correct matching arm assembly (sold separately).
- Mount the closer body to the door or frame according to the chosen installation method and the included instructions.
- Attach the selected door closer arm to the closer shoe and the door/frame.
- Make initial adjustments to the closing speed and latching speed using the provided adjustment screws.
- Adjust the back-check function if necessary to prevent the door from hitting the wall.
Compatibility:
- Designed for use on exterior or interior doors.
- Suitable for doors weighing up to the specified maximum capacity (consult product documentation for exact weight limits).
- Meets ADA requirements when installed and adjusted correctly.
- Compatible with standard door and frame preparations.
Care:
- Clean the exterior of the closer body with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as they can damage the finish.
- Periodically check all mounting screws and adjustment settings to ensure they remain secure and properly calibrated.
- Lubrication is generally not required for hydraulic door closers; however, if any noise or stiffness develops, consult the manufacturer's service manual.