Gorilla Glue - 250ml

Gorilla Glue is activated by moisture. Lightly dampen one surface with water before applying the glue. For dense hardwoods, dampen both surfaces. Do not add water to the bottle.

Gorilla Glue is an all-purpose adhesive that bonds stone, metal, glass, ceramic, wood, foam, and more.

The glue expands approximately three times its volume as it cures, allowing it to penetrate and fill small gaps for an exceptionally strong bond.

You should clamp the object for a minimum of 1-2 hours. For optimal results and maximum strength, allow the bond to cure fully for 24 hours.

Yes, Gorilla Glue is 100% waterproof and can withstand extreme temperatures (-40°C to 100°C), making it suitable for both indoor and outdoor applications.

Wipe away fresh squeeze-out immediately with a damp cloth. Dried Gorilla Glue is very difficult to remove and may require scraping or sanding.

When stored properly in a cool, dry place with the cap tightly sealed, Gorilla Glue typically has a shelf life of 1-2 years.

Ensure surfaces were properly dampened (lightly for most materials, both for dense hardwoods) and clamped for the minimum required time. Check if the glue is expired or has been exposed to air for too long.

Apply a thinner layer of glue and ensure adequate clamping pressure to prevent excess material from being forced out. Wipe away fresh squeeze-out immediately with a damp cloth.

Ensure you are working in a suitable temperature range and that the surfaces are not excessively hot. Avoid applying in direct sunlight if possible.

Soak the nozzle in warm water for a few minutes, then try to clear it. Ensure the nozzle is wiped clean after each use and the cap is tightly sealed.