Metsä Wood Planed Whitewood Spruce Batten - (L)3M (W)50mm (T)25mm

The Metsä Wood planed whitewood spruce batten is (L)3m x (W)5cm x (T)25mm, weighing 2.44kg. This k...

Best current price£7.97from B&Q

One Offer

1 offer from £7.97

View price history by clicking the chart icon.

B&Q - Planed Whitewood Spruce Batten (L)3M (W)50mm (T)25mm
Free delivery in 1–3 days
£7.97
Visit shop

Product Information

Full details

This guide is for anyone using the Metsä Wood Planed Whitewood Spruce Batten for construction or joinery projects. The key benefit of this batten is its dimensional stability, thanks to the kiln-drying process, leading to more accurate results. A point to note is that while planed, some sanding may still be required depending on your specific needs. This guide covers the batten's features, usage, care, and troubleshooting.

All features

Model Part NumberCutb03
BrandMetsä Wood

Extended Product Information

FAQs

What is the primary benefit of kiln-drying?

Kiln-drying reduces the moisture content in the wood, minimizing warping and twisting and enhancing dimensional stability.

Is the batten suitable for outdoor use?

Yes, but it's essential to treat the wood with a protective finish (paint, stain, or varnish) to shield it from moisture and weather elements.

Can I use this batten for structural applications?

Yes, provided the dimensions and load-bearing requirements are appropriate for your specific project. Always ensure that the construction meets building codes.

What tools are needed to cut the batten?

A saw suitable for cutting timber, such as a hand saw, circular saw, or table saw, will be needed.

How do I calculate the amount of battens I need?

Measure your project's dimensions, consider spacing requirements, and calculate the total linear meters needed. Then divide the total length by 3 meters (the length of each batten).

Can I paint this batten?

Yes, the planed surface is suitable for painting. Ensure the surface is clean and free of dust before applying paint.

What type of fasteners should I use?

Use screws or nails suitable for the application. For structural applications, consider using screws designed for timber construction.

Troubleshooting

Batten appears warped after installation.

Ensure the batten is properly supported and fastened. Check for and eliminate sources of moisture. Consider adding additional support if the span is too great.

Splitting occurs when screwing or nailing.

Pre-drill holes before inserting screws or nails, especially near the ends of the batten. Use appropriate screws/nails for the application and timber type.

Surface imperfections.

Sand the surface lightly with fine-grit sandpaper to remove any remaining imperfections or rough patches.

Pros and Cons

Pros

  • Reduced warping and twisting due to kiln-drying.
  • Smooth, planed surface for immediate use.
  • Suitable for a variety of construction and joinery tasks.
  • Consistent dimensions for ease of use in projects.
  • Spruce wood offers good workability.

Cons

  • Requires further finishing, such as painting or staining.
  • May require some sanding.
  • Susceptible to moisture damage if not treated properly.

Setup, Compatibility & Care

This batten is ready to use immediately upon delivery. No special setup is required. The key to the batten's longevity is proper care:

  • Storage: Store the battens in a dry, covered area, away from direct sunlight and moisture.
  • Protection: Apply a suitable wood treatment (e.g., paint, stain, varnish) to protect the wood from the elements and moisture. This is especially important for exterior applications.
  • Cutting: Use appropriate tools such as a saw suitable for cutting timber.
  • Fastening: Use screws or nails suitable for the application. Pre-drilling may be necessary to prevent splitting, especially near the ends of the batten.

Similar items

Price History

DatePrice
Visit shop