Sawn Treated Roofing Batten - 4.8m x 25mm x 50mm - BS5534

The BS5534 Grade Sawn Treated Roofing Batten is engineered to meet rigorous modern roofing standar...

Best current price£28.92from B&Q

All Offers

2 offers from £28.92 - £30.00

View price history by clicking the chart icon.

B&Q - 25mm X 50mm Bs5534 Graded Sawn Treated Roofing Batten (2" X 1") 4.8M
Free delivery in 1–3 days
£28.92
Visit shop
HomebaseBS5534 Grade Sawn Treated Roofing Batten 4.8m x 25mm x 50mm
Free delivery in 1–3 days
£30.00
Visit shop

Product Information

Full details

The B&Q BS5534 Grade Sawn Treated Roofing Batten is designed for professional roofers and serious DIY builders who require a reliable, high-strength support system for pitched roof coverings. The primary benefit of this product is its compliance with rigorous modern construction standards, ensuring superior straightness and structural integrity for slates and tiles. However, users should note that the 4.8-meter length requires careful transportation planning and adequate space for safe onsite handling and storage.

All features

Model Part NumberBS5534
BrandB&Q

Extended Product Information

FAQs

What does BS5534 grading mean?

It is the British Standard for roofing battens, ensuring the timber has undergone specific testing for strength, moisture content, and consistency.

Can I use these for indoor furniture projects?

While structurally sound, they are pressure-treated for exterior use and may contain chemicals not suitable for indoor living spaces.

How should I store these if I cannot install them immediately?

Store them flat, raised off the ground using spacers, and keep them under cover to prevent them from getting wet or warping under sun exposure.

Is this timber resistant to termites?

Yes, the pressure treatment is specifically designed to provide protection against rot, decay, and insect attack.

Can these be cut to smaller lengths?

Yes, they can be cut to size using standard carpentry tools, though you should treat any exposed end-grain with timber preservative.

Troubleshooting

Batten appears slightly bowed during inspection

Minor natural curvature is common in timber; ensure the bowed side faces upward (camber up) during installation to allow the weight of the tiles to straighten the run.

Splitting at the ends when nailing

Ensure you are using the correct diameter fixings and pre-drill pilot holes if working near the very edge of the timber.

Pros and Cons

Pros

  • Meets stringent BS5534 safety and performance standards
  • Pressure treatment ensures long-term durability against environmental hazards
  • High level of straightness aids in accurate installation
  • Ideal for supporting heavy slate and tile roof finishes

Cons

  • Significant 4.8m length may require large vehicle transport
  • Weight of treated timber can be substantial when moving bulk quantities
  • Requires proper storage to prevent warping before installation

Setup, Compatibility & Care

Installation should be carried out by qualified individuals following standard roofing practices. Ensure that the battens are fixed using appropriate corrosion-resistant nails at every rafter intersection. To maintain the integrity of the pressure treatment, any cut ends should be recoated with a suitable timber preservative.

Store the battens in a dry, well-ventilated area, keeping them stacked flat on level ground with adequate spacing to allow for airflow. Avoid direct contact with wet ground to prevent moisture absorption. If transporting, ensure the 4.8m lengths are properly secured to avoid damage during transit.

Similar items

Price History

DatePrice
Visit shop