Knightsbridge Screwless 10Ax 2-Way Switch 1G - Gold
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for electricians and homeowners seeking a modern, easy-to-install single-gang, 2-way light switch. Its key benefit is a sleek, screwless design with a polished brass finish that enhances interior aesthetics. A potential caveat is the requirement for a minimum 16mm mounting box depth. This Knightsbridge switch offers a low-profile, durable solution, certified to relevant safety standards, and comes in a bulk pack for convenience.
All features
| Colour | Gold |
|---|---|
| Model Part Number | SF2000PB |
| Brand | Knightsbridge |
Extended Product Information
FAQs
What is the difference between a 1-way and a 2-way switch?
A 1-way switch controls a light from a single location. A 2-way switch allows control of a light from two different locations (e.g., top and bottom of stairs).
Can this switch be used for LED lighting?
Yes, provided the total load of the LED lighting circuit does not exceed the switch's 10AX rating. For very low-power LED circuits, a specific low-load switch might be recommended by the manufacturer.
What size mounting box is required?
A minimum mounting box depth of 16mm is required for installation.
How do I clean the polished brass finish?
Use a soft, damp cloth. For stubborn marks, a mild, non-abrasive cleaner specifically for brass can be used sparingly, followed by drying with a clean cloth.
What does 10AX rating mean?
The 'AX' rating indicates the switch is suitable for inductive loads, such as fluorescent or discharge lighting. 10AX is a common rating for general lighting circuits.
Is this switch suitable for outdoor use?
This switch is designed for interior use. It has a built-in gasket for some protection but is not rated for direct outdoor exposure.
Can I use this switch in a 3-way or 4-way switching setup?
This is a 2-way switch. For 3-way (controlling from 3 locations) or 4-way (controlling from 4 locations) setups, you would typically use a combination of 2-way and intermediate (4-way) switches, following specific wiring diagrams.
Troubleshooting
Switch not operating light
Verify power is restored. Double-check wiring connections for both the switch and the light fixture. Ensure the correct 2-way wiring configuration has been used.
Light flickers when switch is operated
Check all wiring connections are tight. The bulb may be faulty or incompatible with the circuit. Ensure the switch's 10AX rating is sufficient for the connected load.
Switch mechanism feels stiff or loose
Ensure the faceplate is correctly clipped on. If the issue persists, the internal mechanism may be damaged; consider replacing the unit. Check that the mounting box is secure.
Pros and Cons
Pros
- Sleek, modern screwless aesthetic
- Durable polished brass finish
- Easy installation with built-in gasket
- Certified to safety standards
- Cost-effective in bulk packs
Cons
- Requires a minimum 16mm depth mounting box
- Polished brass may require specific cleaning to maintain shine
- Single-gang format limits to one switch per plate
Setup, Compatibility & Care Instructions
Setup:
- Ensure Power is Off: Before installation, always switch off the power supply at the consumer unit.
- Prepare Mounting Box: Ensure a suitable minimum 16mm depth mounting box is securely fitted.
- Wire the Switch: Connect the appropriate wires to the terminals according to standard 2-way switching diagrams. Consult a qualified electrician if unsure.
- Attach Faceplate: Clip the screwless faceplate onto the installed switch mechanism.
Compatibility:
- Compatible with standard UK wiring systems.
- Suitable for use with low-power lighting circuits (10AX rating).
- Requires a minimum 16mm depth flush or surface mounting box.
Care:
- Clean with a soft, damp cloth. Avoid abrasive cleaners or solvents which may damage the polished brass finish.
- Periodically check connections to ensure they remain secure.