Johnstone's Woodstain - Dark Rosewood - 750ml

Coverage is approximately 12 square meters per liter. The 750ml container will therefore cover roughly 9 square meters, depending on the wood type and application method.

The woodstain is touch-dry in about 1 hour. However, allow for sufficient time before exposing it to weather elements.

Yes, Johnstone's Woodstain is suitable for both interior and exterior wood surfaces and provides excellent all-weather protection.

No primer is generally needed. However, ensure the surface is properly prepared through cleaning and sanding to promote adhesion and even color distribution.

For best results and optimal protection, it is usually recommended to apply two coats of the woodstain. Additional coats can be applied to achieve a darker, richer color.

Clean brushes and applicators with a suitable solvent or cleaner, following the manufacturer's instructions.

Yes, you can, but the old finish must be clean and free of any loose or flaking material, and it must be compatible with the new woodstain.

Ensure the application area is well-ventilated, and the temperature is within the recommended range. Check for any underlying issues like dampness or contaminants on the wood surface, and ensure sufficient drying time between coats.

Prepare the surface properly by sanding and cleaning. Apply the woodstain evenly, following the grain of the wood. Apply multiple thin coats rather than one thick coat.

This may be due to poor surface preparation or incompatibility with the existing finish. Ensure the wood surface is properly prepared by sanding and removing old finishes. If the problem persists, consider a different product for your project.