Best current price£14.99from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£14.99Visit shop (250Ml, White) Plasti Dip / Warmergrip - Unique Flexible High Grip Coating 5060418744274
Visit shop4 offers from £14.99 - £26.99
View price history by clicking the chart icon.
The Plasti Dip WARMERGRIP in White is for DIYers and professionals seeking to add a comfortable, non-slip, and durable rubber coating to various surfaces. Its key benefit is transforming handles and grips for improved ergonomics and safety, though it requires careful surface preparation for optimal adhesion, especially on non-absorbent materials.
| Colour | White |
|---|---|
| Brand | Plasti Dip |
If applied directly to absorbent surfaces like wood without a primer, it can often be peeled off. However, if applied to non-absorbent surfaces like metal or plastic with a primer, the coating becomes permanent and cannot be easily removed.
For best durability and grip, applying 3-5 thin coats is generally recommended. Allow each coat to dry sufficiently before applying the next.
It can be applied to metals, plastics, wood, and other surfaces. For non-absorbent surfaces like metal, a primer is recommended for better adhesion.
Drying time varies based on temperature, humidity, and coat thickness. Typically, it is dry to the touch in about 1 hour, but allow at least 4 hours for a full cure before heavy use.
Yes, the dried rubber coating is designed to resist moisture, corrosion, and impact, making it suitable for outdoor or varied environmental conditions.
While the WARMERGRIP itself is a coating, applying another layer of Plasti Dip in a different color is possible, but painting over it with conventional paints may not adhere well and could be removed when the WARMERGRIP is removed (if not primed).
Ensure the surface was properly cleaned and degreased before application. If applied to non-absorbent material without primer, adhesion may be poor. Reapply after proper surface preparation.
Apply in thin, even coats. Shake the can frequently during application. Ensure consistent spray distance and speed.
Metal surfaces require a primer for optimal adhesion. Clean the metal thoroughly and apply the recommended Plasti Dip primer before applying the WARMERGRIP.
Ensure adequate drying time between coats and for the final layer. If the product remains tacky, it may not have fully cured. Avoid excessive handling until fully cured.
Compatibility: This product can be applied to metals, plastics, and wood. For non-absorbent surfaces like metal, it is recommended to use a Plasti Dip primer (Clear or Grey) for optimal adhesion. Be aware that using a primer will make the coating permanent.
Application: Ensure surfaces are clean, dry, and free from grease or oil. Apply in thin, even coats. Allow each coat to dry before applying the next. Multiple coats are recommended for a durable finish. Allow ample drying time before putting the coated item into regular use.
Care: To clean treated surfaces, use a damp cloth with mild soap. Avoid abrasive cleaners or solvents, as these can damage the rubber coating. The coating is designed to be durable and resistant to general wear and tear.
