Sikkens Cetol HLS Plus Exterior Woodstain - Dark Oak

For optimal results as a standalone product, apply three coats. When used with Sikkens Filter 7 Plus, apply one coat of Cetol HLS Plus followed by two coats of Filter 7 Plus.

No, it should not be used on surfaces treated with water-repellent wood preservatives containing wax, oil, or silicone.

It is suitable for smooth wooden surfaces, including softwoods, hardwoods, plywood, block board, and particle board.

Ensure the wood surface is clean, dry, and free from any existing coatings, dirt, or mildew.

It provides a translucent and semi-gloss finish, enhancing the natural beauty of the wood grain.

Clean tools with a suitable solvent immediately after use.

Yes, it provides resistance to UV light, protecting the wood from sun damage.

Yes, it can be used as a base coat for other Sikkens products like Cetol Filter 7 Plus.

Ensure proper surface preparation before application and avoid applying too thick a coat. If this occurs, sand the surface and reapply.

Ensure proper ventilation and that the application temperature is within the recommended range. Check that the product is not expired.

Make sure the wood surface is not sealed or treated with a water repellent. Sand the surface lightly to improve adhesion.