Best current price£382.42from B&Q
Shopping.co.uk recommended and popular offers
B&Q£382.42Visit shop B&Q - Hampto Tall Single Wooden Garden Gate 1050mm Wide X 1800mm High Hat14
Visit shop3 offers from £382.42 - £426.97
View price history by clicking the chart icon.
For homeowners seeking a robust and imposing garden entrance, the Burbage Iron Craft Hampton Tall Single Garden Gate offers significant visual impact and durable construction. Its primary benefit is the striking spear top steel infill panel combined with sturdy tongue and groove boards. A key consideration is that the steel components require painting, and the wood preserver is not a complete guarantee against rot.
| Colour | Blue |
|---|---|
| Model Part Number | CGLHamptonWooTalSinGat1050HAT14 |
| Brand | Burbage Iron Craft |
The gate is constructed from Scandinavian Redwood, sourced from managed forests.
The timber is treated with a general-purpose preserver and is also pressure treated for enhanced protection against rot and decay.
Yes, the steel infill bars are primed black and require a final coat of exterior paint to protect them from rust and achieve your desired finish.
The preserver offers protection, but it is not a 100% guarantee. Periodic inspection and re-treatment of the wood are the end user's responsibility to ensure longevity.
Optional ball top finials are available on request for added ornamentation.
Please note that all timber gate sizes are subject to slight variations due to the natural shrinkage or expansion of wood.
The gate measures 1050mm in width and 1800mm in height.
Check for obstructions, ensure gate posts are plumb and stable, and verify hinge alignment. Minor adjustments to hinges or post position may be necessary.
Inspect the affected area. If minor, clean and apply a strong wood preserver or rot-stopping treatment. For significant decay, consider replacing the affected timber section.
Ensure the steel has been properly painted with an exterior metal paint. Sand away any surface rust, clean thoroughly, and apply a rust-inhibiting primer followed by at least two top coats of suitable metal paint.
Verify that gate posts are firmly set and do not lean. Check that all fixings and hinges are tight. A diagonal brace might be needed for additional support if sagging persists.
Setup: Ensure gate posts are securely installed and level before hanging the gate. The gate is designed to be hung from compatible ironmongery (not included). Attach hinges to the gate and posts, and install a latch mechanism. The steel infill bars should be painted with a suitable exterior metal paint after installation.
Compatibility: This gate is a single unit. For wider openings, consider pairing it with other gates from the Burbage Iron Craft range. Ensure any posts or hardware used are robust enough to support the weight and dimensions of the gate (Width: 1050mm, Height: 1800mm).
Care: Periodically inspect the timber for any signs of wear or damage. Re-apply a suitable wood preserver or stain as needed, depending on environmental exposure. Clean the steel components with a damp cloth and ensure the paint finish is maintained to prevent corrosion. While pressure treated, the wood preserver is not a guaranteed 100% protection against decay; ongoing user maintenance is essential.
