Dulux Trade Walls and Ceilings Vinyl Matt Paint - Noble Grey 5L

Drying times can vary based on temperature and humidity, but typically, the paint is touch-dry within 1-2 hours. Re-coat time is usually around 2-4 hours.

While it can be used on walls and ceilings, for areas with high humidity or potential for frequent cleaning, a more durable finish like a vinyl silk or specific kitchen/bathroom paint might be more suitable. This matt finish is best for lower-moisture areas.

Coverage can vary depending on the surface porosity and application thickness, but generally, a 5L can of this paint covers approximately 35-50 square meters.

No, this product is mixed to order and cannot be returned or refunded unless faulty.

Yes, this paint is specifically designed for both interior walls and ceilings and provides a non-reflective finish that is ideal for ceilings.

Clean brushes and rollers immediately after use with water. Any spills or drips on surfaces should also be wiped away with a damp cloth before they dry.

Stir the paint well before use. Apply with a brush or roller using even strokes. For best results, ensure consistent application and consider two coats for optimal coverage and finish.

Ensure the surface was properly prepared and primed. Stir the paint thoroughly. Apply in thinner, even coats rather than trying to cover in one thick layer. Check for excessive application or spreading.

Avoid over-working the paint. Apply with consistent pressure and direction. Ensure you are using the correct tools for the type of paint and surface. Thinning the paint slightly with water may help, but follow manufacturer guidelines.

This can be caused by uneven application or differing porosity of the surface. Ensure all coats are applied uniformly. If the issue persists after two coats, consider applying a primer or mist coat to even out surface absorption.