Wall Wash Light with Switch - Semi-Circle Fabric Shade - Grey

This fixture is compatible with LED bulbs. (Info needed: specific bulb base type, e.g., E26/E27, and maximum wattage will be in the product manual).

The dimmability depends on the bulb you choose and whether it is connected to a compatible dimmer switch. Always use dimmable LED bulbs with a compatible dimmer switch. (Info needed: confirm if the fixture itself is dimmer-compatible).

No, this Harper Living Wall Wash Light is designed for indoor use only. It is not rated for outdoor or wet environments.

Gently dust the fabric shade with a soft, dry cloth or duster. For light spots, carefully blot with a slightly damp, clean cloth and mild soap, then pat dry immediately to avoid watermarks.

While some experienced DIYers may be able to install it, professional installation by a qualified electrician is highly recommended to ensure safety and compliance with electrical codes.

Info needed: Please refer to the product packaging or Harper Living's official website for detailed warranty information.

1. Ensure the circuit breaker is on and providing power to the fixture. 2. Check that the bulb is correctly screwed in and not burnt out; replace if necessary. 3. Verify the integrated on/off switch is in the 'on' position. 4. If the issue persists, consult an electrician to check wiring.

1. Ensure the bulb is fully tightened and is the correct wattage/type for the fixture. 2. If using an LED bulb, ensure it is dimmable if connected to a dimmer switch (Info needed: confirm dimmer compatibility). 3. Check for loose wiring connections; consult an electrician if needed.

1. Ensure you are using a bulb with an appropriate lumen output for your desired brightness. 2. Verify the bulb's wattage is not too low (while staying within the fixture's maximum wattage). 3. Ensure the shade is clean and free of excessive dust buildup.

1. Check if the bulb is working when direct wired (bypassing the switch, for testing only, by a qualified person). 2. If the switch is faulty, it may need to be replaced by a qualified electrician or the fixture may require servicing.