Regatta Professional Mens 3 Layer Soft Shell Jacket - Black - Polka Dot - XS

The 3-layer technology provides a combination of waterproofing, wind resistance, and breathability, offering protection from the elements while managing internal moisture.

This soft shell jacket is designed for protection against wind and rain. For very cold temperatures, it is best worn as an outer layer over insulating mid-layers like fleece or down.

Wash on a gentle cycle with a technical wash or mild detergent, rinse thoroughly, and tumble dry on low heat. Avoid fabric softeners and bleach. Periodic re-proofing is recommended.

DWR is a coating applied to the outer fabric that causes water to bead up and roll off, helping to keep the fabric's surface dry and maintaining breathability.

The jacket offers waterproof protection, making it suitable for moderate rain. For prolonged exposure to heavy downpours, additional waterproof layers might be beneficial.

The jacket features two lower zip pockets and one chest zip pocket, providing secure storage options.

Please refer to the size guide provided in the product description. Chest measurements are given as a reference: XS: 36 in., S: 38 in., M: 40 in., L: 42 in., XL: 44 in., XXL: 48 in., 3XL: 51 in.

The Durable Water Repellent (DWR) finish may need to be reactivated or reapplied. Follow the care instructions for re-proofing and reactivating the DWR.

Ensure the jacket is properly ventilated by opening the full zip. If the issue persists during heavy activity, the breathability may be compromised; check for blockages in the fabric membranes and follow care instructions for cleaning.

Gently clean the zipper teeth with a soft brush and mild soap. Ensure no dirt or debris is obstructing the zipper. Apply a wax-based lubricant if necessary.

This can happen if fabric softener was used or if detergent was not fully rinsed. Ensure you are using a mild detergent specifically for technical wear and rinse thoroughly. A low-heat tumble dry can sometimes help soften the fabric.