D-C-Fix Linia Static Cling Window Film - White

Clean the film with standard household cleaners. Avoid using abrasive cleaners or tools that could scratch the surface.

Yes, the film can be removed and reapplied without leaving residue, as long as both the film and glass remain clean.

No, the film is designed to reduce glare and offer privacy while still allowing a good amount of light to pass through.

No, application is relatively simple. The static cling design and the use of water make it easy to reposition the film and remove air bubbles.

Mistakes can be easily corrected by peeling back the film and reapplying it. Just make sure the glass remains wet.

This information is not provided in the product details.

It is generally not recommended for textured glass as the static cling may not adhere well.

Lift the film at the affected area and re-spray with water. Use a squeegee to smooth out the bubbles from the center to the edges.

Ensure the glass surface is thoroughly cleaned and wet before application. Also, check that the backing paper has been completely removed. If the edges are not sticking, ensure there is a 5mm gap between the film and the window frame.

Ensure the edges are not touching the rubber seals around the window. Trim any excess film or re-apply the film with a greater gap.

Try separating the film and the backing paper at a corner by gently bending them.