Best current price£24.67from The Range
Shopping.co.uk recommended and popular offers
The Range£24.67Visit shop Jrp Riveting Products 4.8 X 12 Steel Countersunk Head Rivets - Jrpskh4812 - Box Of 250 - Grey
Visit shop8 offers from £24.67 - £32.55
View price history by clicking the chart icon.
Designed for DIY enthusiasts and professionals alike, these JRP Riveting Products 4.8 x 16mm Steel Countersunk Head Rivets are engineered for structural applications requiring a strong, durable, and flush-finish connection. While their high-quality steel construction offers superior mechanical strength and reliability, users should note that they require a compatible manual or pneumatic riveting tool for correct installation, and they are best suited for materials where a countersunk hole can be accurately prepared.
| Colour | Grey |
|---|---|
| Model Part Number | 1322509 |
| Brand | JRP Riveting Products |
These rivets have a diameter of 4.8mm and a length of 16mm.
While they are designed for structural metal applications, they can be used on rigid plastics if a countersunk hole is created; however, caution is required to prevent cracking.
No, these are compatible with most standard manual or pneumatic pop-rivet guns available at hardware stores.
They are made of steel, which is strong but susceptible to rust if exposed to moisture; it is recommended to paint or seal them if used outdoors.
The countersunk head sits flush with the surface, which is ideal for aerodynamic applications, aesthetic finishes, or surfaces where other objects will be placed on top.
Check that the countersunk hole is deep enough; you may need to increase the chamfer depth with a countersink drill bit.
Ensure the hole diameter is not too large and the materials were clamped tightly together before riveting.
Ensure the rivet gun nozzle is compatible with 4.8mm rivets and that the tool is held perfectly perpendicular to the surface.
To ensure a professional installation, start by drilling a hole slightly larger than the rivet diameter (4.8mm) in both pieces of material. Use a countersink bit to chamfer the top hole, ensuring the rivet head sits level with or slightly below the surface. Insert the rivet into your riveting tool and then into the hole. Apply steady pressure to the tool until the mandrel snaps off. For care, ensure the riveting tool's nozzle is sized correctly for the 4.8mm diameter to prevent jamming. While the steel is durable, consider applying a light coat of anti-corrosion spray if using the rivets in outdoor or humid environments to prevent oxidation over time.
