Wilsonart Worktop Edging Strip - Colmar Oak - 1300 x 44mm

Name: Wilsonart Worktop Edging Strip - Colmar Oak - 1300 x 44mm
Brand: Wilsonart
SKU: tuakk2v6qf
Availability: InStock

This Wilsonart worktop edging strip is designed to provide a professional and clean finish to the ...

Best current price£15.00from B&Q

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

B&Q£15.00Visit shop

B&Q - Colmar Oak Worktop Edging Strip 1300 X 44mm

Visit shop

All Offers

3 offers from £15.00 - £168.75

View price history by clicking the chart icon.

B&QB&Q - Colmar Oak Worktop Edging Strip 1300 X 44mm

Free delivery in 1–3 days

£15.00

Visit shop

OnBuy.comWilsonart (3000 X 600Mm, Length Cut) Black Sparkle Gloss Laminate Kitchen Worktop 40Mm

Free delivery in 1–3 days

£168.75

Visit shop

Product Information

Full details

The Wilsonart Worktop Edging Strip in Colmar Oak is designed for homeowners and kitchen installers looking to achieve a professional, finished appearance on exposed worktop edges. This essential finishing component provides a perfect color match for Colmar Oak surfaces, ensuring a seamless visual transition while acting as a critical barrier against moisture ingress and daily wear. While it is highly durable and easy to apply, users should note that the 1300mm length is fixed, requiring precise measurement and trimming to fit specific kitchen dimensions accurately.

All features

Brand	Wilsonart

Extended Product Information

FAQs

Can I use this on other worktop brands?

This strip is color-matched specifically to Wilsonart Colmar Oak surfaces. While it may fit other brands, the color and texture finish will likely not match.

What adhesive should I use?

A high-quality, heat-resistant contact adhesive is recommended for the most durable bond.

Is the strip heat resistant?

The edging is designed to match the heat resistance specifications of the corresponding Wilsonart worktop.

How do I cut the strip to size?

Use a sharp utility knife or a specialized worktop edge trimmer for a clean, straight cut.

Does the strip come with adhesive pre-applied?

No, this strip is not pre-glued and requires the application of a separate contact adhesive.

Troubleshooting

The edging strip is peeling away at the corners.

Re-apply a small amount of contact adhesive, ensure the surface is clean, and clamp the area firmly until the glue is fully cured.

Visible gap between the strip and the worktop surface.

Use a fine-grit sandpaper or a dedicated edge trimmer to gently smooth the transition until flush.

Pros and Cons

Pros

Ensures a uniform and cohesive kitchen design
Protects vulnerable worktop cores from moisture
Easy to apply with standard contact adhesive
High-quality construction from a trusted brand
Provides a clean, finished edge profile

Cons

Fixed length requires manual trimming for smaller sections
Requires separate purchase of high-strength contact adhesive
Cannot be reused once applied and bonded
Requires a steady hand for precise alignment

Setup, Compatibility & Care

Setup: Ensure the worktop edge is clean, dry, and free of dust or debris before application. Apply a thin, even layer of contact adhesive to both surfaces. Allow the adhesive to become tacky before carefully aligning and pressing the edging strip firmly into place. Use a roller or a block of wood to apply even pressure across the entire length for a secure bond.

Compatibility: This strip is specifically designed for the Colmar Oak range of Wilsonart worktops. While it may visually match other light oak surfaces, it is best utilized with the intended Colmar Oak product line to guarantee exact finish consistency.

Care: Clean with a soft, damp cloth and mild household detergent. Avoid using abrasive scouring pads or harsh chemicals, as these can dull the finish or compromise the adhesive bond over time. Wipe away standing water immediately if it pools near the edge.