Ricoh Drum kit yellow - D2960124
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This yellow drum unit (PCDU) is for owners of compatible Ricoh and Lanier printers seeking consistent, high-quality yellow output. Its key benefit is providing an OEM solution for reliable performance and an approximate yield of 36,000 pages. A caveat is that it is a single color drum unit, meaning separate drum units are required for other colors.
All features
| Colour | Yellow |
|---|---|
| Model Part Number | D2960124 |
| Brand | Ricoh |
Extended Product Information
FAQs
What is a PCDU?
PCDU stands for Photoconductor Drum Unit. It is a critical component in laser printers that transfers the toner image onto the paper.
How many pages can this yellow drum unit print?
This Ricoh D2960124 Yellow PCDU has an approximate page yield of 36,000 pages.
Can I use this drum unit with printers other than the specified Ricoh models?
This drum unit is specifically designed for Ricoh MPC306, MPC406, MPC307, and MPC407 series printers and compatible Lanier models. Using it with incompatible printers may cause damage or poor print quality.
Do I need to replace the drum unit if I only print in black and white?
While this is a yellow drum unit, it is often part of the imaging system that works in conjunction with other components for all prints. However, if your printer has separate drum units for each color, and you only print black and white, the yellow drum unit may not be immediately affected. Consult your printer's manual for specifics.
How often should I replace the drum unit?
Drum units are typically replaced when they reach their page yield limit or when print quality degrades significantly. The D2960124 has a yield of approximately 36,000 pages.
What is the difference between a drum unit and a toner cartridge?
A toner cartridge holds the powdered ink (toner), while the drum unit is the photosensitive component that attracts the toner and transfers the image to the paper.
Is this a genuine Ricoh part?
Yes, the Ricoh D2960124 is an original (OEM) drum unit manufactured by Ricoh.
Troubleshooting
Print quality issues (streaks, faded yellow)
Ensure the yellow drum unit is correctly installed. Check if the printer's toner level for yellow is adequate. Run a printer cleaning cycle as per your printer's manual.
Printer not recognizing the drum unit
Power off the printer, remove and reinsert the drum unit to ensure it is seated properly. Verify that the drum unit model is correct for your printer.
Yellow color appears dull or inaccurate
Confirm that the correct yellow drum unit is installed and that it is an OEM Ricoh part. Run a color calibration on your printer if available.
Error message related to drum unit
Refer to your printer's specific error code guide. This may indicate a faulty drum unit, an installation issue, or a problem with the printer's internal components.
Pros and Cons
Pros
- Ensures genuine Ricoh quality and reliability.
- High page yield minimizes downtime and cost per page.
- Designed for optimal yellow color reproduction.
- Direct compatibility with specified Ricoh and Lanier printer models.
- Easy to install as a genuine replacement part.
Cons
- Only produces yellow output; other colors require separate drum units.
- As an OEM part, it may be more expensive than third-party alternatives.
- Requires careful handling during installation to avoid damage.
Setup, Compatibility & Care
Compatibility:
This yellow drum unit is specifically designed for the following printer series: Ricoh MPC306, MPC406, MPC307, and MPC407. It is also compatible with various Lanier models that use these same Ricoh platforms.
Setup:
- Ensure the printer is powered off and unplugged before proceeding.
- Open the appropriate printer cover to access the drum unit, following your printer's manual instructions.
- Carefully remove the old drum unit.
- Unpack the new Ricoh D2960124 Yellow PCDU, taking care not to touch the drum surface.
- Gently insert the new drum unit into its designated slot until it clicks into place.
- Close the printer cover, plug in the printer, and power it on.
Care:
- Store the drum unit in its original sealed packaging until ready for installation.
- Avoid exposing the drum unit to direct sunlight, excessive heat, or humidity.
- Handle the drum unit with care to prevent scratches or damage to the photosensitive drum surface.
- Clean only the exterior of the drum unit if necessary, using a dry, lint-free cloth. Do not use liquids or solvents.