Lumora Rivena 1200x500mm Heated Towel Rail - Silver

The Lumora Rivena is a central heating towel radiator measuring 1200mm high by 500mm wide with a 7...

Best current price£97.99from B&Q

Colour

One Offer

1 offer from £97.99

View price history by clicking the chart icon.

B&Q - Rivena 1200X500mm Chrome Heated Towel RailSlimline 12 Bar Ladder Radiator
Free delivery in 1–3 days
£97.99
Visit shop

Product Information

Full details

The Lumora Rivena is a stylish, silver-finished central heating towel radiator designed for homeowners looking to combine bathroom warmth with towel-drying efficiency. Best suited for smaller bathrooms up to 3 square metres, it provides a consistent heat source by integrating directly with your existing wet central heating system. Please note that this model is strictly for hydronic use and is not electric, nor is it compatible with dual fuel conversion kits.

All features

ColourSilver
Model Part NumberTMRR-1200500-CH
BrandLumora

Extended Product Information

FAQs

Can I use this towel rail with an electric heating element?

No, the Lumora Rivena is designed exclusively for wet central heating systems and cannot be converted to dual fuel or electric.

Does this come with the valves needed to connect it to the pipes?

No, radiator valves are not included and must be purchased separately to match your plumbing layout.

How do I determine if this will fit my bathroom size?

This unit is rated for bathrooms up to 3 square metres. Ensure your space does not exceed this size to maintain effective heating.

Is the installation difficult for a DIYer?

We strongly recommend professional installation by a qualified plumber to ensure safety and system compatibility.

What is the maximum operating temperature?

The radiator is rated for a maximum operating temperature of 75 degrees Celsius.

Troubleshooting

Radiator is cold or not heating up

Check if the radiator valves are fully open. If they are, you may need to bleed the radiator to release trapped air.

Cold spots at the top of the unit

This is typically caused by air trapped in the system; use a radiator key to bleed the air out through the top valve.

Leaking at the pipe connections

Ensure the connections are tightened properly. If the leak persists, verify that the thread tape or sealant was applied correctly during installation.

Pros and Cons

Pros

  • Elegant silver finish complements modern bathroom aesthetics
  • Compact 1200mm x 500mm profile saves wall space
  • Sturdy construction built for damp environments
  • Includes all necessary wall brackets and mounting hardware

Cons

  • Not suitable for electric-only or dual-fuel configurations
  • Radiator valves must be purchased separately
  • Limited heating capacity for large rooms exceeding 3 square metres

Setup, Compatibility & Care

Installation requires a professional, qualified plumber to ensure the unit is correctly plumbed into your wet central heating system.

Installation Requirements:

  • Pipe Centres: Must be set at 450mm to match the radiator connections.
  • Valve Selection: Purchase compatible 1/2 inch BSP valves separately.
  • System Type: Suitable for both open-vented and sealed (pressurised) systems.

Care Instructions:

  • Wipe regularly with a soft, damp cloth to maintain the silver finish.
  • Avoid using harsh, abrasive chemicals or scouring pads that could scratch the metallic surface.
  • Periodically bleed the radiator to remove trapped air and ensure even heat distribution across all 12 bars.

Price History

DatePrice
Visit shop